Become a Site Supporter and Never see Ads again!

Author Topic: Hypers for C460B?  (Read 477 times)

0 Members and 1 Guest are viewing this topic.

Offline tapermansam

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 3
  • Gender: Male
    • Sam Cherubin Photography
Hypers for C460B?
« on: March 31, 2025, 01:37:04 PM »
I currently own a pair of AKG C460B and CK-61 cardioid capsules, and want to get a pair of hypers for it and wondering what setup is the best. The CK-63 capsules are very rare and hard to find for sale, but I came across a CK3 which you can apparently use with the C460b body? Anyone have any info on this or what the best route to go down with this setup?

Thanks!

Sam

Offline bluegrass_brad

  • Trade Count: (16)
  • Needs to get out more...
  • *****
  • Posts: 3604
  • Gender: Male
  • Old and in the way.
Re: Hypers for C460B?
« Reply #1 on: March 31, 2025, 03:13:12 PM »
You have to have the A60 adaptor to use the CK1, CK2, CK3, CK8, etc with the C460 body. If your diligent, you can find CK63's. If you were going the CK3 route, I probably wouldn't jump until you had a line on some A60's. Hard to find as well. FollowinBob here on TS is a machinist and does make a run of an A60 clones on occasion.
CK1x, CK2x > Hub Industry Cables > Naiant PFA
CK1, CK8, CK63 > nBob active > Naaint 60v PFA
CK1, CK8, CK63 > 460B

"That was back in a time when society was not quite ready for this music. Anyone remember those days? That's when punk rock was dangerous, right?" - Mike Ness

Offline caymanreview

  • Trade Count: (22)
  • Needs to get out more...
  • *****
  • Posts: 9880
  • Gender: Male
    • shows ive taped  that are in circulation
Re: Hypers for C460B?
« Reply #2 on: March 31, 2025, 06:46:43 PM »
Wait for the 63’s to pop up. It happens.

There was a pair on ebay a couple weeks ago, but pairs are rare on there

If your vigilant on keeping up on the yard sale here and the fb groups youl find some

It took me a few months last year to find some myself

 

RSS | Mobile
Page created in 0.042 seconds with 27 queries.
© 2002-2025 Taperssection.com
Powered by SMF