Become a Site Supporter and Never see Ads again!

Author Topic: ca-11 mic's powered by Sound Pros XLR phantom cable adapter?  (Read 1391 times)

0 Members and 1 Guest are viewing this topic.

Online tonyd

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 6
ca-11 mic's powered by Sound Pros XLR phantom cable adapter?
« on: April 25, 2025, 12:30:55 AM »
Using Tascam FR-AV2 and ca-11 mics - 1 channel of my preamp recently stopped working and not sure I need a preamp if using 32 bit float and with decent preamps in the recorder. I was looking at the SP-XLRM-MINI-2-PHANTOM but want to be sure it would power the ca-11's properly. I also have the sound pros battery box with 12v battery. Any thoughts or suggestions?

https://soundprofessionals.com/product/SP-XLRM-MINI-2-PHANTOM/

"This device is an adaptor for plug-in power mics, which enables the mics to be connected to standard professional microphone preamplifiers or digital recorders with phantom powered XLR inputs. The adapter supplies the appropriate voltage to the plug-in power microphones, and provides a balanced, low impedance output to the microphone preamplifier.

The left and right channels of the adapter operate independently, so phantom power must be supplied to both channels for stereo operation. The adapter requires +9V to +48V phantom power to operate (supply voltage to microphones will be reduced with phantom power supply of less than +12V).

The adapter supplies +5V to each microphone channel."

Offline VibrationOfLife

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 138
Re: ca-11 mic's powered by Sound Pros XLR phantom cable adapter?
« Reply #1 on: April 25, 2025, 06:15:32 PM »
Should work perfectly.

Looks like the line in can provide PIP as well.

Quote
Camera/EXT/TC IN jack (can provide plug-in power)

Why not try that at home first?

https://tascam.com/us/product/fr-av2/spec
« Last Edit: April 25, 2025, 06:26:53 PM by VibrationOfLife »

Online tonyd

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 6
Re: ca-11 mic's powered by Sound Pros XLR phantom cable adapter?
« Reply #2 on: April 26, 2025, 02:21:16 AM »
Thank you for the response and confirmation! I definitely will try at home first, just would hate to damage anything with too much or not enough power. I was wondering if the line in would provide enough levels/gain? With the Tascam mk100 I had to use XLR's for higher levels if not using a preamp. Obviously before 32 bit float which I am new to.

My first recorder was a Sony d6 in the early 90's for Dead shows. Things have come a long way. :)

Online goodcooker

  • Trade Count: (46)
  • Needs to get out more...
  • *****
  • Posts: 5018
  • Gender: Male
  • goes to 11
Re: ca-11 mic's powered by Sound Pros XLR phantom cable adapter?
« Reply #3 on: April 26, 2025, 10:10:26 AM »

Can confirm that the FR AV2 will power the CA11s adequately from the PIP input. I tested it at a relatively loud rock show.

Here's a clip - City and Colour recorded in line with stacks from 25ft away sorta loud nothing crazy - https://on.soundcloud.com/vLSUWjryQZS62SPU6

http://www.archive.org/bookmarks/goodcooker

"Are you the Zman?" - fan at Panic 10-08-10 Kansas City
"I don't know who left this perfectly good inflatable wook doll here, but if I'm blowing her up, I'm keeping her." -  hoppedup

Offline Pieteker

  • Trade Count: (8)
  • Taperssection Regular
  • **
  • Posts: 202
  • Gender: Male
  • The best is yet to come.
    • The Tapers' Manifesto
Rigs: 
AT853 / AT943 (4.7k mod, cardioid) > Marantz PMD620 
Line Audio CM4 > Zoom F3 
DPA 4061 [pending] > Deity PR-2 

The Tapers' Manifesto
Team Europe
Team Line Audio

 

RSS | Mobile
Page created in 0.034 seconds with 28 queries.
© 2002-2025 Taperssection.com
Powered by SMF