Become a Site Supporter and Never see Ads again!
« previous next »
Pages: [1]   Go Down

Author Topic: ISO: ref tapes made w/KM-140" or 150's>V3  (Read 1578 times)

0 Members and 1 Guest are viewing this topic.

Offline LeftoverSammy

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 504
  • Gender: Male
  • MG's FUCKIN' A!!
ISO: ref tapes made w/KM-140" or 150's>V3
« on: February 10, 2004, 01:41:46 PM »
Hey Now - Looking seriously at purchasing a pair of KM-140's or KM-150's but would like to hear what they sound like through a V3 since that is what I currently run.

I am thinking about the hyper Neumanns since I will be using them mostly in small night clubs and bars and want to cut out some of the crowd noise. Wondering what they would sound like through a V3. Have hear nothing but good things about this combo. I have heard some recordings made with 140's but not through a V3. I do like the warmer sound .... is there anyone out there willing to spin me a show or two with that combo?? I can offer some fresh LeftoverSalmon I recorded at the Crystal Ballroom in Portland this weekend with my Nak700's > V3 (sounds pretty good).

Thanks for any help!!

Peace,
LoSammy
Logged
Microtech Gefell SMS2000's (M20 & M21 caps) > Luminous Audio Monarch II's or Audio Magic Silvers > MixPre 3
Grace Designs V3
Marantz PMD661
Core Sound Stealthy Cardiod mics > Battbox> Tascam DR-7

Former Nak CM300 & CM700 Vet (CP1, CP2, CP3 & CP4 caps), MX-100

Its 420.....24/7.....365!! :-)

Offline Tim

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 32913
  • Gender: Male
Re:ISO: ref tapes made w/KM-140" or 150's>V3
« Reply #1 on: February 10, 2004, 01:46:29 PM »
shoot Todd R a pm...

lots of people on this board running that combo!
Logged
I’ve had a few weird experiences and a few close brushes with total weirdness of one sort or another, but nothing that’s really freaked me out or made me feel too awful about it. - Jerry Garcia

Offline blu666z

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 3277
  • AT ES943(H/C/O caps) » JKLab PP9 Pre » wmod UA-5
Re:ISO: ref tapes made w/KM-140" or 150's>V3
« Reply #2 on: February 10, 2004, 02:09:58 PM »
Logged

Offline BC

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 2269
  • Gender: Male
  • Bongo Bongo
Re:ISO: ref tapes made w/KM-140" or 150's>V3
« Reply #3 on: February 10, 2004, 02:59:37 PM »
Kimock 3-28-03, up on archive.org. 140(ORTF)>V3 on stage, this one is wicked!!

I ran 140 (ORTF)>V3 at Bonnaroo 2003, my Funky Meters tape is up on the wi-jams server, check for login info in the kickdown section.

FWIW I am not a big fan of the 150's, too bright sounding for me, just my personal taste. I like the 40's much more than the 50's. Maybe the 50's would sound good in a bassy club though, I have only heard them run from the tapers section in big arena shows.

Take care,
Ben


Logged
In: DPA4022>V3>Microtracker/D8

Out: Morrison ELAD>Adcom GFA555mkII>Martin Logan Aerius i
Pages: [1]   Go Up
« previous next »
 

RSS | Mobile
Page created in 0.083 seconds with 28 queries.
© 2002-2024 Taperssection.com
Powered by SMF