Taperssection.com
Gear / Technical Help => Remote Power => Topic started by: jazzgtrl4 on March 23, 2010, 11:35:14 AM
-
Hi just scored a Minime, and am going to add it to my my rig. Looks like im obviously going to have to buy another Tekkeon battery to power the minime or something else. Anyway is there a way to power all three off the Tekkeon? There is also an extended battery pack you can buy for the Tekkeon but no power outlets on it. any ideas, thanks
-
Possibly but you will need to understand you the amount of power you are going to pull.
You would want to run the V3 and Minime at approx 6V and MT2 at 5V off the USB port
- V3 pulls about 1A x 6 V = 6 W
- MiniME about 0.6A x 6 V = 3.6 W
- MT2 ? - myguess of 0.5A x 5 V = 2.5 W
Total around 12.1 W
The V3 has a Linear Regulator for the initial Power Stage so it is important you run as close to 6V as possible.
The Tekkeon runs for 50 Wh so you'd get about 4 hours max.
Also looks like Microtrack has an internal rechargable battery so this may pose an issue as well (if the recharging circuit is internal to the microtrack then issues may arrise as these circuits can draw alot of power) - you would definitely need to have the microtrack fully charged before use in the field.
-
I run a Benchmark AD2K+, V-3, R-44 and an MT all off of the Tekkeon double battery pack.
All run at 12volts, the MT2 off the usb port. Get 6 hours with this setup. MT2 fully charged to start.
Thought the V-3 would be a problem but Grace told me anywhere from 6-14 volts would work fine.
Page shoepsnbox for a custom cable, he made mine.
-
I run a Benchmark AD2K+, V-3, R-44 and an MT all off of the Tekkeon double battery pack.
All run at 12volts, the MT2 off the usb port. Get 6 hours with this setup. MT2 fully charged to start.
Thought the V-3 would be a problem but Grace told me anywhere from 6-14 volts would work fine.
Page shoepsnbox for a custom cable, he made mine.
very cool, thanks for the info. i know i would deffinetly need the add on 2nd pack from Tekkeon. So you have a custom cable coming out of the Tekkeon to power the V3 and the AD2k at the same time?
-
So you have a custom cable coming out of the Tekkeon to power the V3 and the AD2k at the same time?
Yes, with three ends to power my three devices. Works perfect as long as they are the same voltage.
-
So you have a custom cable coming out of the Tekkeon to power the V3 and the AD2k at the same time?
Yes, with three ends to power my three devices. Works perfect as long as they are the same voltage.
Got it, thanks for the info.