Taperssection.com
Gear / Technical Help => Battery Boxes, Preamps, Mixers, ADCs, and Processors => Topic started by: airbladder on February 17, 2004, 04:36:23 PM
-
I just got my v2 today and was wonderig what the high pass filter does, why would I use it, ect... Any help would be great. ;)
Thanks, Ed
FWIW I will be running MBHO's> V2> Minime> Dap1.
-
Hey Moke --
Your sig reads:
TL's,4022's>V3 rack-mounted>M1
stealth:4022's>V2 in handbag>M1
For stealth, why 4022 > V2 > M1 instead of 4022 > V3 > M1? Footprint is basically the same size - you afeared of being seen with the blinking lights or some such?
-
what Moke said... only use position 2 if you need to use it and only use it when the bass is very, very heavy. I really try not to use it at all.
-
whaaaaaaatttttttt?
details!
-
;)
-
well I have heard great stories about DPA's customer service, I hope that holds true for you... good luck Moke!
-
+t moke, sorry for your troubles. When did dpa farm the operation out to Apogee?
-
;D
-
That sucks Moke T+
-
I believe Scott Brown had good luck with DPA customer service when one of his 4022s started flaking out
-
a good rule of thumb is, if you can feel the bass in your chest, use the rolloff
-
With MBHO's too much bass is rarely an issue; thanks for the info.