Taperssection.com
Gear / Technical Help => Battery Boxes, Preamps, Mixers, ADCs, and Processors => Topic started by: Jhurlbs81 on December 23, 2013, 09:53:55 AM
-
Hey All-
Does anyone have any information on the details of the Sonasax SX-M2's low cut setting? Curious where the rolloff begins and how step it is, the manual was less than helpful. ::)
11. LOW CUT FILTER
The "LF CUT" filter allows cutting of very low frequencies. To turn on this filter,
move the "LF CUT" switch downward.
Use this filter only if necessary!
-
18dB/oct, -3dB at 70Hz
http://www.sonosax.ch/discontinued/sxm2m1/sxm2m1_index.html (http://www.sonosax.ch/discontinued/sxm2m1/sxm2m1_index.html)
-
:banging head:
http://www.youtube.com/watch?v=qpMeOivb1Vs