Taperssection.com
Gear / Technical Help => Microphones & Setup => Topic started by: old and in the way on June 20, 2021, 06:45:27 PM
-
Shapeway mic bar recommendations for my Schoeps MK41v's with the cmc1 amps. reverse configuration . I can run them vertical with my rycote inv's and i guess i could run them reverse din or ortf but id like to take the guess work out of the equation . Any recommendations ?
-
Scott has some good insight into what you may need. I would reach out
https://www.shapeways.com/shops/srsrecordingservices?T=1624332675033
-
Scott has some good insight into what you may need. I would reach out
https://www.shapeways.com/shops/srsrecordingservices?T=1624332675033
Thanks i got ahold of scott and have a vertical mount ordered for my cmc1 41v"s.
-
Scott has some good insight into what you may need. I would reach out
https://www.shapeways.com/shops/srsrecordingservices?T=1624332675033
Thanks i got ahold of scott and have a vertical mount ordered for my cmc1 41v"s.
:clapping:
-
Hi all,
I haven't been successful trying to contact Scott through the Shapeways site. I'm trying to navigate which version of the Schoeps mounts are the correct fit for my CCM 4 K fixed-cable mics, to fit the mic cable housing (and are correct spacing) for them.
There is a CCM category, but they appear to be Lemo
NBobs, actives, versions? I'm lost! Any help appreciated. Looking to grab DIN, ORTF and NOS
Thanks!
-james
-
You could try contacting Scott through his company instead.
https://srsrecordingservices.com (https://srsrecordingservices.com)
-
Thank you, he responded right away! As it turns out all the CCM/NBob/active mounts he offers also fit the hardwired versions. However with the varying overall lengths of the OEM and aftermarket active cable housings, the patterns won’t be 100% perfect distance-wise of course. This doesn’t particularly concern me but he did offer to create specific CCM 4 K mounts if I take some measurements :coolguy:
-
Well that was easy! Provided Scott with some measurements and pictures and within a day he had the CCM K models up :clapping:
https://www.shapeways.com/marketplace/accessories/music?tag=ccmk4