Become a Site Supporter and Never see Ads again!

Author Topic: shapeways mic mount  (Read 2083 times)

0 Members and 1 Guest are viewing this topic.

Offline old and in the way

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 194
shapeways mic mount
« on: June 20, 2021, 06:45:27 PM »
Shapeway mic bar recommendations for my Schoeps MK41v's with the cmc1 amps. reverse configuration . I can run them vertical with my rycote inv's and i guess i could run them reverse din or ortf but id like to take the guess work out of the equation  . Any recommendations ?

Offline Top Hat

  • Trade Count: (2)
  • Taperssection Newbie
  • *
  • Posts: 19
Re: shapeways mic mount
« Reply #1 on: June 21, 2021, 11:32:06 PM »
Scott has some good insight into what you may need. I would reach out


https://www.shapeways.com/shops/srsrecordingservices?T=1624332675033

Offline old and in the way

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 194
Re: shapeways mic mount
« Reply #2 on: July 15, 2021, 08:18:16 AM »
Scott has some good insight into what you may need. I would reach out


https://www.shapeways.com/shops/srsrecordingservices?T=1624332675033

Thanks i got ahold of scott and have a vertical mount ordered for my cmc1 41v"s.

Offline dactylus

  • Site Supporter
  • Trade Count: (59)
  • Needs to get out more...
  • *
  • Posts: 5931
  • Gender: Male
  • Maplewood, MN
Re: shapeways mic mount
« Reply #3 on: July 15, 2021, 08:46:36 AM »
Scott has some good insight into what you may need. I would reach out


https://www.shapeways.com/shops/srsrecordingservices?T=1624332675033

Thanks i got ahold of scott and have a vertical mount ordered for my cmc1 41v"s.

 :clapping:
hot licks > microphones > recorder



...ball of confusion, that's what the world is today, hey hey...

Offline cd2go

  • Trade Count: (10)
  • Taperssection Member
  • ***
  • Posts: 522
  • Gender: Male
    • Strictly Slambovian
Re: shapeways mic mount
« Reply #4 on: September 02, 2022, 11:40:52 PM »
Hi all,

I haven't been successful trying to contact Scott through the Shapeways site. I'm trying to navigate which version of the Schoeps mounts are the correct fit for my CCM 4 K fixed-cable mics, to fit the mic cable housing (and are correct spacing) for them.

There is a CCM category, but they appear to be Lemo

NBobs, actives, versions? I'm lost! Any help appreciated. Looking to grab DIN, ORTF and NOS

Thanks!

-james
« Last Edit: September 04, 2022, 07:50:32 AM by cd2go »

Offline voltronic

  • Trade Count: (34)
  • Needs to get out more...
  • *****
  • Posts: 3621
Re: shapeways mic mount
« Reply #5 on: September 03, 2022, 07:00:27 PM »
You could try contacting Scott through his company instead.
https://srsrecordingservices.com
DPA 4061 ~ Line Audio CM3 ~ Naiant X-Q ~ AT 853  |  Naiant PFAs ~ Shure FP24  |  Zoom F6 ~ Sony PCM-M10
MOTU M2 ~ KRK Rokit RP5 ~ Sennheiser HD 650 ~ Etymotic ER4XR  |  iZotope RX ~ Reaper ~ foobar2000 (SoX linear)


Team Line Audio

Offline cd2go

  • Trade Count: (10)
  • Taperssection Member
  • ***
  • Posts: 522
  • Gender: Male
    • Strictly Slambovian
Re: shapeways mic mount
« Reply #6 on: September 04, 2022, 08:41:16 AM »
Thank you, he responded right away! As it turns out all the CCM/NBob/active mounts he offers also fit the hardwired versions. However with the varying overall lengths of the OEM and aftermarket active cable housings, the patterns won’t be 100% perfect distance-wise of course. This doesn’t particularly concern me but he did offer to create specific CCM 4 K mounts if I take some measurements  :coolguy:
« Last Edit: September 04, 2022, 08:51:52 AM by cd2go »

Offline cd2go

  • Trade Count: (10)
  • Taperssection Member
  • ***
  • Posts: 522
  • Gender: Male
    • Strictly Slambovian
Re: shapeways mic mount
« Reply #7 on: September 05, 2022, 07:08:42 PM »
Well that was easy! Provided Scott with some measurements and pictures and within a day he had the CCM K models up  :clapping:

https://www.shapeways.com/marketplace/accessories/music?tag=ccmk4

 

RSS | Mobile
Page created in 0.045 seconds with 31 queries.
© 2002-2022 Taperssection.com
Powered by SMF