Become a Site Supporter and Never see Ads again!

Author Topic: Foam vs. furry wind screen  (Read 1482 times)

0 Members and 1 Guest are viewing this topic.

Offline Iku

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 5
Foam vs. furry wind screen
« on: March 24, 2022, 01:27:10 AM »
Which one would be better for Olympus LS-14. Want to record at the bar.

Offline Fatah Ruark (aka MIKE B)

  • Trade Count: (11)
  • Needs to get out more...
  • *****
  • Posts: 9945
  • Gender: Male
  • I dream in beige.
    • sloppy.art.ink
Re: Foam vs. furry wind screen
« Reply #1 on: March 24, 2022, 02:28:44 PM »
If it's an inside bar you don't need any unless you're set up under a vent.
||| MICS:  Beyer CK930 | DPA 4022 | DPA 4080 | Nevaton MCE400 | Sennheiser Ambeo Headset |||
||| PREAMPS: DPA d:vice | Naiant Tinybox | Naiant IPA |||
||| DECKS: Sound Devices MixPre6 | iPod Touch 32GB |||
|||Concert History || LMA Recordings || Live YouTube |||

Offline Iku

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 5
Re: Foam vs. furry wind screen
« Reply #2 on: March 27, 2022, 01:27:05 AM »
Thank you, I rather though about using it as a masking gear in this case.

Offline morst

  • I think I found an error on the internet; #UnionStrong
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 5966
Re: Foam vs. furry wind screen
« Reply #3 on: March 27, 2022, 03:03:38 AM »
If it's an inside bar you don't need any unless you're set up under a vent.
or a ceiling fan!?
https://toad.social/@morst spoutible.com/morst post.news/@acffhmorst

Offline jadedphan

  • gear owned:
  • Trade Count: (5)
  • Taperssection Regular
  • **
  • Posts: 198
  • Gender: Male
  • at one with the cosmic rhythms
    • seeded recordings found on: http://bt.etree.org - search jadedphan
Re: Foam vs. furry wind screen
« Reply #4 on: June 24, 2022, 10:51:24 PM »
or smoke/dust/etc.....

mics: schoeps mk4v, mk41v (matched), mk22 (matched) , mk41 (matched), mk22 (not part of matched pair)/MK8 (mid/side); neumann u89i, neumann km150

preamps: aeta psp3, schoeps vms02ib, vms5u x 2, sonosax sx-m2, sx-m2d2;

recorders: sound devices: mixpre 6ii, mixpre 10ii; sony: d7 & d8, tascam da-30mkii

mic bodies: schoeps cmc1L x 4,  neumann km100

actives/specialty cables: ak2Lsu x 14, aksu2ta3 x 6,  aksu2u x 8, 5m nbobs actives (schoeps version), kcy x 2, k5s (5pin stereo) x 10 @ 5m; custom 5 pin 9’, 16’, 12’ (x2), k5Lsu (x 6), nbobs actives (schoeps), custom km100 actives

 

RSS | Mobile
Page created in 0.066 seconds with 29 queries.
© 2002-2024 Taperssection.com
Powered by SMF