Become a Site Supporter and Never see Ads again!

Author Topic: Cable management  (Read 2795 times)

0 Members and 1 Guest are viewing this topic.

Offline rigpimp

  • Trade Count: (14)
  • Needs to get out more...
  • *****
  • Posts: 2892
  • Gender: Male
  • Jarts don't kill people!
Re: Cable management
« Reply #15 on: May 19, 2022, 02:48:54 PM »
Side entry Techflex for the SKM active cables coils fine.  I used it on my set for a long time.  I used the 1/4" F6 TECHFLEX

Nice! I was thinking of trying this but wasn't sure on size. So 1/4 in is good? Snug fit? Does it come with ends to secure it from unraveling? I guess I would order a 25 foot section.

I took thin strips of gaffers tape and secured the cables together about every 18"-24".  I DID NOT secure the ends so that I could spread the caps or the xlr's, if needed.  The cables pretty much stay in place unless they are tugged on
Mics: Schoeps MK5 G MP, Schoeps CCM 4 Lg MP, Schoeps MK8 MP, nBob cables > PFA, KCY 250/5 > PFA
Pre/A>D/P48: Sonosax SX/M2-LS, E.A.A. PSP-2, Naiant Tinybox, Neumann BS48i-2 (for sale)
Recorders: Sound Devices Mixpre-6, Sony PCM-M10, Sony PCM-A10
Playback: Jolida 1501 Hybrid > McIntosh MX 130 > Von Schweikert VR-4 JR, or Creek OBH-11 > Sennheiser HD700
http://archive.org/bookmarks/kskreider
https://archive.org/details/thespps

Offline ts

  • Trade Count: (77)
  • Needs to get out more...
  • *****
  • Posts: 3531
  • Gender: Male
Re: Cable management
« Reply #16 on: May 19, 2022, 04:29:35 PM »
Side entry Techflex for the SKM active cables coils fine.  I used it on my set for a long time.  I used the 1/4" F6 TECHFLEX

Nice! I was thinking of trying this but wasn't sure on size. So 1/4 in is good? Snug fit? Does it come with ends to secure it from unraveling? I guess I would order a 25 foot section.

I took thin strips of gaffers tape and secured the cables together about every 18"-24".  I DID NOT secure the ends so that I could spread the caps or the xlr's, if needed.  The cables pretty much stay in place unless they are tugged on

👍

Online Twenty8

  • Trade Count: (9)
  • Taperssection Member
  • ***
  • Posts: 351
  • Union Ironwork/Union Grip Rigging
Re: Cable management
« Reply #17 on: May 19, 2022, 06:39:10 PM »
Side entry Techflex for the SKM active cables coils fine.  I used it on my set for a long time.  I used the 1/4" F6 TECHFLEX

Nice! I was thinking of trying this but wasn't sure on size. So 1/4 in is good? Snug fit? Does it come with ends to secure it from unraveling? I guess I would order a 25 foot section.

I took thin strips of gaffers tape and secured the cables together about every 18"-24".  I DID NOT secure the ends so that I could spread the caps or the xlr's, if needed.  The cables pretty much stay in place unless they are tugged on

👍
Great idea for my existing cables as these won't get here (most likely) until after Phish OB.  Not that concerned.  Will be a nice step into better cable management... and time management as well.
Open ~ Beyerdynamic MC930 and 950 : Line Audio CM3/CM4 : Busman BSC1/K3
Closed/Open ~ AT853 (c,subc,o) > Sound Pro bboxes:
Decks ~ MixPre 6ii, A10, M10, DR2d
Pres ~ 2x Oade mod UA-5 (W+, ACM+)
Also ~ AT3031 : AT831 : Berliner CM33 : Busman BSC1/K1-4 : Line Audio OM1 : Sennheiser e614 : Shure Beta98/s

 

RSS | Mobile
Page created in 0.031 seconds with 25 queries.
© 2002-2022 Taperssection.com
Powered by SMF