Become a Site Supporter and Never see Ads again!

Author Topic: HIGH Pass filter on 788T  (Read 542 times)

0 Members and 1 Guest are viewing this topic.

Offline waltmon

  • Trade Count: (14)
  • Needs to get out more...
  • *****
  • Posts: 2035
  • Gender: Male
HIGH Pass filter on 788T
« on: June 02, 2022, 07:01:52 AM »
Is it more common to run this off or in the lowest setting? Interested in hearing thoughts...maybe a good thing with LD mics...dunno
KM140's, KM150's, U89's, Mixpre-10T II, Mixpre-6 (1st gen), 788T

CA-14 > UBB > Tascam DR-2D

1 pound non-sequential $50.00 bills

Offline goodcooker

  • Trade Count: (41)
  • Needs to get out more...
  • *****
  • Posts: 3904
  • Gender: Male
  • goes to 11
Re: HIGH Pass filter on 788T
« Reply #1 on: June 04, 2022, 02:29:24 AM »

I don't ever use the low cut unless my mics are getting overwhelmed by being really close to subwoofers and even then I like to roll off the bass in post if need be.
Line Audio CM3 || ADK A51 type IV
SD MixpreD || Oade Warm Mod UA5
Tascam DR680 || Marantz PMD661 || Korg MR1 (homebrew internal battery mod)

http://www.archive.org/bookmarks/goodcooker

"Are you the Zman?" - fan at Panic 10-08-10 Kansas City
"I don't know who left this perfectly good inflatable wook doll here, but if I'm blowing her up, I'm keeping her." -  hoppedup

Offline hipporu

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 75
  • The head - this is the distance between the ears
Re: HIGH Pass filter on 788T
« Reply #2 on: June 04, 2022, 06:52:41 AM »
To use or not to use the HPF should be decided by your ears, the situation, what you want to get in the end...
When I record outdoors in windy weather, I use 40Hz or 80Hz sometimes.
If I'm only recording voice, I can use 200Hz.
In some situations, the HPF allows you to reduce the level of an unwanted low-frequency signal, thereby increasing the recording level for a useful signal without overloading.
Etc.
There is no universal answer.
https://mynewmicrophone.com/high-pass-filter/
Line Audio CM3 CM4 OM1, MKH 416, MKH 406, BP4029, AT4073a, AT Pro 45,  Ferrograph (Reslo RBL), ECM-737
SD MixPre-6, SD MixPre-3II, PCM-A10, Deity HD-TX, Marantz PMD620, Sony TC-D5 ProII
SD MixPre-D, Dcode PS-T, Sound Professionals SP-Preamp, Church Audio ST-20A

 

RSS | Mobile
Page created in 0.031 seconds with 25 queries.
© 2002-2022 Taperssection.com
Powered by SMF