Become a Site Supporter and Never see Ads again!

Author Topic: MixPre 10 II Power Options???  (Read 1321 times)

0 Members and 1 Guest are viewing this topic.

Offline dueling

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 420
  • Gender: Male
  • TeamFocker
MixPre 10 II Power Options???
« on: July 09, 2022, 05:03:24 PM »
I am sure it's out there but I cannot find the MixPre 10 II power options thread.  Can someone please direct me there? My MP10 will only power up with the wall plug. I thought it powered up by USB-C?  Thank you!
Schoeps MK4v's > Nbob Actives > Naiant PFAs > Sound Devices MixPre 10 II
Schoeps MK41's > Nbob Actives > Naiant PFAs > Sound Devices MixPre 10 II
DPA 4015's > MMP-ER Modular Active Rear Cable > Sound Devices MixPre 10 II

Offline jbell

  • TDS
  • Trade Count: (146)
  • Needs to get out more...
  • *****
  • Posts: 4437
  • Gender: Male
  • Spreadicated
Re: MixPre 10 II Power Options???
« Reply #1 on: July 09, 2022, 05:31:50 PM »
You can only power it with the Hirose connector and/or battery sled.  It doesn't power with the usbc like the Mixpre 3/6.  IMO the hirose is a much better option and more secure.

I am sure it's out there but I cannot find the MixPre 10 II power options thread.  Can someone please direct me there? My MP10 will only power up with the wall plug. I thought it powered up by USB-C?  Thank you!
« Last Edit: July 09, 2022, 05:35:14 PM by jbell »
Mics: DPA ST4011ER & 4018ER 500 | AKG ck61 & ck63> Nbob actives
Preamps: DPA mma 6000
Recorders: Sound Devices Mixpre-10 II | Sony PCM A10

-22        -12         -6        TDS   (32/48)     
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]][}   
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]][} 
__________________________
|Record|  Runtime: 4:19.99  {|||] 75%

Offline dueling

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 420
  • Gender: Male
  • TeamFocker
Re: MixPre 10 II Power Options???
« Reply #2 on: July 09, 2022, 05:46:16 PM »
Ah, ok thank you. I did not know that.  I guess I should have started this thred in the remote power section.  Sorry admins!

Thanks again for the help.
Schoeps MK4v's > Nbob Actives > Naiant PFAs > Sound Devices MixPre 10 II
Schoeps MK41's > Nbob Actives > Naiant PFAs > Sound Devices MixPre 10 II
DPA 4015's > MMP-ER Modular Active Rear Cable > Sound Devices MixPre 10 II

Offline dueling

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 420
  • Gender: Male
  • TeamFocker
Re: MixPre 10 II Power Options???
« Reply #3 on: July 09, 2022, 05:53:44 PM »
You can only power it with the Hirose connector and/or battery sled.  It doesn't power with the usbc like the Mixpre 3/6.  IMO the hirose is a much better option and more secure.

I am sure it's out there but I cannot find the MixPre 10 II power options thread.  Can someone please direct me there? My MP10 will only power up with the wall plug. I thought it powered up by USB-C?  Thank you!

How long will the battery sled give me in the field running 6 channels?  Any idea?  and is there a portable Hirose battery option?  Thanks!
Schoeps MK4v's > Nbob Actives > Naiant PFAs > Sound Devices MixPre 10 II
Schoeps MK41's > Nbob Actives > Naiant PFAs > Sound Devices MixPre 10 II
DPA 4015's > MMP-ER Modular Active Rear Cable > Sound Devices MixPre 10 II

Offline jbell

  • TDS
  • Trade Count: (146)
  • Needs to get out more...
  • *****
  • Posts: 4437
  • Gender: Male
  • Spreadicated
Re: MixPre 10 II Power Options???
« Reply #4 on: July 09, 2022, 07:15:47 PM »
I don't think you would get more that 2 hours with the AA sled with more than 2 channels.  Order a Hirose > M tip battery cable from Ted.  Then you can buy a talent cell or Max Oak battery depending on your powering needs. 

https://www.amazon.com/dp/B016BJCRUO?ref=nb_sb_ss_w_as-reorder-t1_ypp_rep_k0_1_11&amp&crid=3N688WASQGBPN&amp&sprefix=talentcell+

https://www.amazon.com/MAXOAK-50000mAh-Portable-Charger-External/dp/B00YP823NA/ref=sr_1_4?crid=1AWI6L9MVOV3L&keywords=maxoak+power+bank&qid=1657408524&s=electronics&sprefix=Max+Oak+po%2Celectronics%2C78&sr=1-4&ufe=app_do%3Aamzn1.fos.18ed3cb5-28d5-4975-8bc7-93deae8f9840

You can only power it with the Hirose connector and/or battery sled.  It doesn't power with the usbc like the Mixpre 3/6.  IMO the hirose is a much better option and more secure.

I am sure it's out there but I cannot find the MixPre 10 II power options thread.  Can someone please direct me there? My MP10 will only power up with the wall plug. I thought it powered up by USB-C?  Thank you!

How long will the battery sled give me in the field running 6 channels?  Any idea?  and is there a portable Hirose battery option?  Thanks!
« Last Edit: July 09, 2022, 07:18:24 PM by jbell »
Mics: DPA ST4011ER & 4018ER 500 | AKG ck61 & ck63> Nbob actives
Preamps: DPA mma 6000
Recorders: Sound Devices Mixpre-10 II | Sony PCM A10

-22        -12         -6        TDS   (32/48)     
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]][}   
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]][} 
__________________________
|Record|  Runtime: 4:19.99  {|||] 75%

Offline dueling

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 420
  • Gender: Male
  • TeamFocker
Re: MixPre 10 II Power Options???
« Reply #5 on: July 09, 2022, 07:41:00 PM »
Where can I get in touch with Ted?  Also, I'd like this thing to be able to power 6 channels and run for a pretty long time.  Battery pack suggestions?  The larger one below? Thank you for your help!!!


I don't think you would get more that 2 hours with the AA sled with more than 2 channels.  Order a Hirose > M tip battery cable from Ted.  Then you can buy a talent cell or Max Oak battery depending on your powering needs. 

https://www.amazon.com/dp/B016BJCRUO?ref=nb_sb_ss_w_as-reorder-t1_ypp_rep_k0_1_11&amp&crid=3N688WASQGBPN&amp&sprefix=talentcell+

https://www.amazon.com/MAXOAK-50000mAh-Portable-Charger-External/dp/B00YP823NA/ref=sr_1_4?crid=1AWI6L9MVOV3L&keywords=maxoak+power+bank&qid=1657408524&s=electronics&sprefix=Max+Oak+po%2Celectronics%2C78&sr=1-4&ufe=app_do%3Aamzn1.fos.18ed3cb5-28d5-4975-8bc7-93deae8f9840

You can only power it with the Hirose connector and/or battery sled.  It doesn't power with the usbc like the Mixpre 3/6.  IMO the hirose is a much better option and more secure.

I am sure it's out there but I cannot find the MixPre 10 II power options thread.  Can someone please direct me there? My MP10 will only power up with the wall plug. I thought it powered up by USB-C?  Thank you!

How long will the battery sled give me in the field running 6 channels?  Any idea?  and is there a portable Hirose battery option?  Thanks!
Schoeps MK4v's > Nbob Actives > Naiant PFAs > Sound Devices MixPre 10 II
Schoeps MK41's > Nbob Actives > Naiant PFAs > Sound Devices MixPre 10 II
DPA 4015's > MMP-ER Modular Active Rear Cable > Sound Devices MixPre 10 II

Offline jbell

  • TDS
  • Trade Count: (146)
  • Needs to get out more...
  • *****
  • Posts: 4437
  • Gender: Male
  • Spreadicated
Re: MixPre 10 II Power Options???
« Reply #6 on: July 09, 2022, 08:18:00 PM »
Here is Ted He can get a cable sorted!

https://taperssection.com/index.php?topic=133186.0

I would do the Max Oak battery if you are running 6 channels!  That will cover you.
Mics: DPA ST4011ER & 4018ER 500 | AKG ck61 & ck63> Nbob actives
Preamps: DPA mma 6000
Recorders: Sound Devices Mixpre-10 II | Sony PCM A10

-22        -12         -6        TDS   (32/48)     
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]][}   
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]][} 
__________________________
|Record|  Runtime: 4:19.99  {|||] 75%

Offline dueling

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 420
  • Gender: Male
  • TeamFocker
Re: MixPre 10 II Power Options???
« Reply #7 on: July 09, 2022, 08:55:10 PM »
Awesome.. Thank you!!!

Here is Ted He can get a cable sorted!

https://taperssection.com/index.php?topic=133186.0

I would do the Max Oak battery if you are running 6 channels!  That will cover you.
Schoeps MK4v's > Nbob Actives > Naiant PFAs > Sound Devices MixPre 10 II
Schoeps MK41's > Nbob Actives > Naiant PFAs > Sound Devices MixPre 10 II
DPA 4015's > MMP-ER Modular Active Rear Cable > Sound Devices MixPre 10 II

Offline SMsound

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 117
Re: MixPre 10 II Power Options???
« Reply #8 on: July 11, 2022, 02:58:26 AM »
Whoa...I use a MixPre-6 running phantom on 4 channels with full brightness, and I power that with a little $25 Anker 10,000mah battery for hours. The MaxOak linked above is a $130  50,000mAh. Seems like mega overkill in terms of mah for concerts (even with the MP10's extra channels), no?

Awesome.. Thank you!!!

Here is Ted He can get a cable sorted!

https://taperssection.com/index.php?topic=133186.0

I would do the Max Oak battery if you are running 6 channels!  That will cover you.
waves -> bits

Offline jbell

  • TDS
  • Trade Count: (146)
  • Needs to get out more...
  • *****
  • Posts: 4437
  • Gender: Male
  • Spreadicated
Re: MixPre 10 II Power Options???
« Reply #9 on: July 11, 2022, 08:37:13 AM »
The Mixpre 10 doesn't use usbc for power!  It needs at least 12v.  So for 6 channels it will work great.  I used mine for 12 hours a day only running 2 channels at a festival and it used half the battery power.  I'd rather have the extra power and not need it then need it and not have it.

Whoa...I use a MixPre-6 running phantom on 4 channels with full brightness, and I power that with a little $25 Anker 10,000mah battery for hours. The MaxOak linked above is a $130  50,000mAh. Seems like mega overkill in terms of mah for concerts (even with the MP10's extra channels), no?

Awesome.. Thank you!!!

Here is Ted He can get a cable sorted!

https://taperssection.com/index.php?topic=133186.0

I would do the Max Oak battery if you are running 6 channels!  That will cover you.
« Last Edit: July 11, 2022, 11:14:05 AM by jbell »
Mics: DPA ST4011ER & 4018ER 500 | AKG ck61 & ck63> Nbob actives
Preamps: DPA mma 6000
Recorders: Sound Devices Mixpre-10 II | Sony PCM A10

-22        -12         -6        TDS   (32/48)     
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]][}   
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]][} 
__________________________
|Record|  Runtime: 4:19.99  {|||] 75%

Offline mgtaper

  • Trade Count: (9)
  • Taperssection Regular
  • **
  • Posts: 120
  • Gender: Male
Mics: microtech gefell m310's, DPA 4023's, DPA 4661's, busman bsc-1 k1,k2,k3 & k4, busman modded nak 300's, stock nak 300's cp1, cp2 & cp4, rode nt5's
Cables: Kind Kables or DarkTrain Silvers
Pres: Sound Devices MixPre 10 II, Sound Devices MixPre 3 II, Tascam DR 680, Apogee Mini-me,  Edirol UA-5 BM2P+ mod, Mic2496
Bit Buckets:  HP IPAQ 2795HX or MicroTrack II(x2)

Offline jbell

  • TDS
  • Trade Count: (146)
  • Needs to get out more...
  • *****
  • Posts: 4437
  • Gender: Male
  • Spreadicated
Mics: DPA ST4011ER & 4018ER 500 | AKG ck61 & ck63> Nbob actives
Preamps: DPA mma 6000
Recorders: Sound Devices Mixpre-10 II | Sony PCM A10

-22        -12         -6        TDS   (32/48)     
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]][}   
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]][} 
__________________________
|Record|  Runtime: 4:19.99  {|||] 75%

Offline mgtaper

  • Trade Count: (9)
  • Taperssection Regular
  • **
  • Posts: 120
  • Gender: Male
Re: MixPre 10 II Power Options???
« Reply #12 on: July 11, 2022, 02:09:00 PM »
I'm not exactly sure on run-time since I'm also using the L-Series Battery mount:

https://www.bhphotovideo.com/c/product/1333782-REG/sound_devices_mx_lmount_battery_sled_holds_2.html

Using 2 of the F960/970 @ 7.4V 87mAh 64.5Wh batteries.

The last time I recharged, only down two bars on the Juice Box. About 1 day @ a festival.
Mics: microtech gefell m310's, DPA 4023's, DPA 4661's, busman bsc-1 k1,k2,k3 & k4, busman modded nak 300's, stock nak 300's cp1, cp2 & cp4, rode nt5's
Cables: Kind Kables or DarkTrain Silvers
Pres: Sound Devices MixPre 10 II, Sound Devices MixPre 3 II, Tascam DR 680, Apogee Mini-me,  Edirol UA-5 BM2P+ mod, Mic2496
Bit Buckets:  HP IPAQ 2795HX or MicroTrack II(x2)

Offline dueling

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 420
  • Gender: Male
  • TeamFocker
Re: MixPre 10 II Power Options???
« Reply #13 on: July 12, 2022, 04:03:23 PM »
I am testing out a run of all 6 channels with the MAXOAK battery.   35 mins in so far at 32bit float / 48 and the battery has not flintched.  Are there any out there that aren't so big and heavy, but still have great run times?  Thanks again for the tip!!!

What about this one?   https://www.amazon.com/gp/product/B07P87JTVT


I don't think you would get more that 2 hours with the AA sled with more than 2 channels.  Order a Hirose > M tip battery cable from Ted.  Then you can buy a talent cell or Max Oak battery depending on your powering needs. 

https://www.amazon.com/dp/B016BJCRUO?ref=nb_sb_ss_w_as-reorder-t1_ypp_rep_k0_1_11&amp&crid=3N688WASQGBPN&amp&sprefix=talentcell+

https://www.amazon.com/MAXOAK-50000mAh-Portable-Charger-External/dp/B00YP823NA/ref=sr_1_4?crid=1AWI6L9MVOV3L&keywords=maxoak+power+bank&qid=1657408524&s=electronics&sprefix=Max+Oak+po%2Celectronics%2C78&sr=1-4&ufe=app_do%3Aamzn1.fos.18ed3cb5-28d5-4975-8bc7-93deae8f9840

You can only power it with the Hirose connector and/or battery sled.  It doesn't power with the usbc like the Mixpre 3/6.  IMO the hirose is a much better option and more secure.

I am sure it's out there but I cannot find the MixPre 10 II power options thread.  Can someone please direct me there? My MP10 will only power up with the wall plug. I thought it powered up by USB-C?  Thank you!

How long will the battery sled give me in the field running 6 channels?  Any idea?  and is there a portable Hirose battery option?  Thanks!

« Last Edit: July 12, 2022, 04:05:06 PM by dueling »
Schoeps MK4v's > Nbob Actives > Naiant PFAs > Sound Devices MixPre 10 II
Schoeps MK41's > Nbob Actives > Naiant PFAs > Sound Devices MixPre 10 II
DPA 4015's > MMP-ER Modular Active Rear Cable > Sound Devices MixPre 10 II

Offline jbell

  • TDS
  • Trade Count: (146)
  • Needs to get out more...
  • *****
  • Posts: 4437
  • Gender: Male
  • Spreadicated
Re: MixPre 10 II Power Options???
« Reply #14 on: July 12, 2022, 05:34:07 PM »
You could get the Talentcell battery I linked!  It is smaller and lighter.  You aren't going to get as long of run times with 6 channels of p48, but a solid battery for normal shows. I have one as a backup.  I've never used the battery you linked, but it should work. 

I am testing out a run of all 6 channels with the MAXOAK battery.   35 mins in so far at 32bit float / 48 and the battery has not flintched.  Are there any out there that aren't so big and heavy, but still have great run times?  Thanks again for the tip!!!

What about this one?   https://www.amazon.com/gp/product/B07P87JTVT


I don't think you would get more that 2 hours with the AA sled with more than 2 channels.  Order a Hirose > M tip battery cable from Ted.  Then you can buy a talent cell or Max Oak battery depending on your powering needs. 

https://www.amazon.com/dp/B016BJCRUO?ref=nb_sb_ss_w_as-reorder-t1_ypp_rep_k0_1_11&amp&crid=3N688WASQGBPN&amp&sprefix=talentcell+

https://www.amazon.com/MAXOAK-50000mAh-Portable-Charger-External/dp/B00YP823NA/ref=sr_1_4?crid=1AWI6L9MVOV3L&keywords=maxoak+power+bank&qid=1657408524&s=electronics&sprefix=Max+Oak+po%2Celectronics%2C78&sr=1-4&ufe=app_do%3Aamzn1.fos.18ed3cb5-28d5-4975-8bc7-93deae8f9840

You can only power it with the Hirose connector and/or battery sled.  It doesn't power with the usbc like the Mixpre 3/6.  IMO the hirose is a much better option and more secure.

I am sure it's out there but I cannot find the MixPre 10 II power options thread.  Can someone please direct me there? My MP10 will only power up with the wall plug. I thought it powered up by USB-C?  Thank you!

How long will the battery sled give me in the field running 6 channels?  Any idea?  and is there a portable Hirose battery option?  Thanks!
« Last Edit: July 12, 2022, 05:35:57 PM by jbell »
Mics: DPA ST4011ER & 4018ER 500 | AKG ck61 & ck63> Nbob actives
Preamps: DPA mma 6000
Recorders: Sound Devices Mixpre-10 II | Sony PCM A10

-22        -12         -6        TDS   (32/48)     
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]][}   
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]][} 
__________________________
|Record|  Runtime: 4:19.99  {|||] 75%

Offline dueling

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 420
  • Gender: Male
  • TeamFocker
Re: MixPre 10 II Power Options???
« Reply #15 on: July 12, 2022, 06:37:16 PM »
Awesome. Yeah, I don't tape festivals. Just looking to tape maybe an opening band, and then two maybe three set shows, max.  Charge overnight and tape again the next night kind of deal.  Not looking to go all day.  Will the Talentcell get me through what I'm looking for?  Thank you!

You could get the Talentcell battery I linked!  It is smaller and lighter.  You aren't going to get as long of run times with 6 channels of p48, but a solid battery for normal shows. I have one as a backup.  I've never used the battery you linked, but it should work. 

I am testing out a run of all 6 channels with the MAXOAK battery.   35 mins in so far at 32bit float / 48 and the battery has not flintched.  Are there any out there that aren't so big and heavy, but still have great run times?  Thanks again for the tip!!!

What about this one?   https://www.amazon.com/gp/product/B07P87JTVT


I don't think you would get more that 2 hours with the AA sled with more than 2 channels.  Order a Hirose > M tip battery cable from Ted.  Then you can buy a talent cell or Max Oak battery depending on your powering needs. 

https://www.amazon.com/dp/B016BJCRUO?ref=nb_sb_ss_w_as-reorder-t1_ypp_rep_k0_1_11&amp&crid=3N688WASQGBPN&amp&sprefix=talentcell+

https://www.amazon.com/MAXOAK-50000mAh-Portable-Charger-External/dp/B00YP823NA/ref=sr_1_4?crid=1AWI6L9MVOV3L&keywords=maxoak+power+bank&qid=1657408524&s=electronics&sprefix=Max+Oak+po%2Celectronics%2C78&sr=1-4&ufe=app_do%3Aamzn1.fos.18ed3cb5-28d5-4975-8bc7-93deae8f9840

You can only power it with the Hirose connector and/or battery sled.  It doesn't power with the usbc like the Mixpre 3/6.  IMO the hirose is a much better option and more secure.

I am sure it's out there but I cannot find the MixPre 10 II power options thread.  Can someone please direct me there? My MP10 will only power up with the wall plug. I thought it powered up by USB-C?  Thank you!

How long will the battery sled give me in the field running 6 channels?  Any idea?  and is there a portable Hirose battery option?  Thanks!
Schoeps MK4v's > Nbob Actives > Naiant PFAs > Sound Devices MixPre 10 II
Schoeps MK41's > Nbob Actives > Naiant PFAs > Sound Devices MixPre 10 II
DPA 4015's > MMP-ER Modular Active Rear Cable > Sound Devices MixPre 10 II

Offline jbell

  • TDS
  • Trade Count: (146)
  • Needs to get out more...
  • *****
  • Posts: 4437
  • Gender: Male
  • Spreadicated
Re: MixPre 10 II Power Options???
« Reply #16 on: July 12, 2022, 06:47:13 PM »
Yeah, that will work and use the same M tip as the Max oak. 

Awesome. Yeah, I don't tape festivals. Just looking to tape maybe an opening band, and then two maybe three set shows, max.  Charge overnight and tape again the next night kind of deal.  Not looking to go all day.  Will the Talentcell get me through what I'm looking for?  Thank you!

You could get the Talentcell battery I linked!  It is smaller and lighter.  You aren't going to get as long of run times with 6 channels of p48, but a solid battery for normal shows. I have one as a backup.  I've never used the battery you linked, but it should work. 

I am testing out a run of all 6 channels with the MAXOAK battery.   35 mins in so far at 32bit float / 48 and the battery has not flintched.  Are there any out there that aren't so big and heavy, but still have great run times?  Thanks again for the tip!!!

What about this one?   https://www.amazon.com/gp/product/B07P87JTVT


I don't think you would get more that 2 hours with the AA sled with more than 2 channels.  Order a Hirose > M tip battery cable from Ted.  Then you can buy a talent cell or Max Oak battery depending on your powering needs. 

https://www.amazon.com/dp/B016BJCRUO?ref=nb_sb_ss_w_as-reorder-t1_ypp_rep_k0_1_11&amp&crid=3N688WASQGBPN&amp&sprefix=talentcell+

https://www.amazon.com/MAXOAK-50000mAh-Portable-Charger-External/dp/B00YP823NA/ref=sr_1_4?crid=1AWI6L9MVOV3L&keywords=maxoak+power+bank&qid=1657408524&s=electronics&sprefix=Max+Oak+po%2Celectronics%2C78&sr=1-4&ufe=app_do%3Aamzn1.fos.18ed3cb5-28d5-4975-8bc7-93deae8f9840

You can only power it with the Hirose connector and/or battery sled.  It doesn't power with the usbc like the Mixpre 3/6.  IMO the hirose is a much better option and more secure.

I am sure it's out there but I cannot find the MixPre 10 II power options thread.  Can someone please direct me there? My MP10 will only power up with the wall plug. I thought it powered up by USB-C?  Thank you!

How long will the battery sled give me in the field running 6 channels?  Any idea?  and is there a portable Hirose battery option?  Thanks!
Mics: DPA ST4011ER & 4018ER 500 | AKG ck61 & ck63> Nbob actives
Preamps: DPA mma 6000
Recorders: Sound Devices Mixpre-10 II | Sony PCM A10

-22        -12         -6        TDS   (32/48)     
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]][}   
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]][} 
__________________________
|Record|  Runtime: 4:19.99  {|||] 75%

Offline dueling

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 420
  • Gender: Male
  • TeamFocker
Re: MixPre 10 II Power Options???
« Reply #17 on: July 13, 2022, 03:38:41 PM »
Just a heads up, I just did a test run and got around 6 hours, running 6 channels, using this cable and a J-Go Tanker Power Bank via USB-C > Hirose.

amazon.com/gp/product/B08TTJ3C1X

https://jgotech.com/products/the-tanker-26800mah-45w-pd-portable-laptop-and-phone-charger
Schoeps MK4v's > Nbob Actives > Naiant PFAs > Sound Devices MixPre 10 II
Schoeps MK41's > Nbob Actives > Naiant PFAs > Sound Devices MixPre 10 II
DPA 4015's > MMP-ER Modular Active Rear Cable > Sound Devices MixPre 10 II

 

RSS | Mobile
Page created in 0.069 seconds with 40 queries.
© 2002-2022 Taperssection.com
Powered by SMF