Become a Site Supporter and Never see Ads again!

Author Topic: Disassemble 711 Binder Connector  (Read 285 times)

0 Members and 1 Guest are viewing this topic.

Offline crunchy

  • Trade Count: (4)
  • Taperssection Member
  • ***
  • Posts: 422
  • Gender: Male
    • My List
Disassemble 711 Binder Connector
« on: October 14, 2022, 02:20:17 PM »
Anyone know how to disassemble a 711 Binder connector that is terminated already? Just trying to look at the solder points to see if I want to tackle making my own cables. The silver ring just spins. Do I need a special tool for this? It almost looks like the interior black connectors might screw together, but it’s hard to tell. Google has not been helpful for any video of assembling this type of connector.

This is the connector.    https://www.binder-usa.com/us-en/products/subminiature-circular-connectors/m9-ip40/99-0095-100-05-m9-ip40-male-cable-connector-contacts-5-30-40-mm-unshielded-solder-ip40

At the bottom of that page is lists a mounting key. Guessing that might be the tool I need?
« Last Edit: October 14, 2022, 02:25:02 PM by crunchy »

Offline crunchy

  • Trade Count: (4)
  • Taperssection Member
  • ***
  • Posts: 422
  • Gender: Male
    • My List
Re: Disassemble 711 Binder Connector
« Reply #1 on: October 14, 2022, 09:49:43 PM »
For anyone curious, after looking a little more closely there are two small tabs you have to push in to release the silver screw ring. Then you can disassemble.

 

RSS | Mobile
Page created in 0.024 seconds with 24 queries.
© 2002-2022 Taperssection.com
Powered by SMF