Become a Site Supporter and Never see Ads again!

Author Topic: In Need of A Stealth Taping Doctor  (Read 2314 times)

0 Members and 1 Guest are viewing this topic.

Offline mountainhop

  • Trade Count: (3)
  • Taperssection Regular
  • **
  • Posts: 108
Re: In Need of A Stealth Taping Doctor
« Reply #45 on: October 23, 2022, 04:36:46 PM »
Ah, my bad. That's what I get for reading the (wrong) manual ;)

RTRM!  ;D

Online aaronji

  • Site Supporter
  • Trade Count: (8)
  • Needs to get out more...
  • *
  • Posts: 3578
Re: In Need of A Stealth Taping Doctor
« Reply #46 on: October 23, 2022, 04:54:59 PM »
^ Better than "RTRFM", eh jerryfreak?

[EDIT: Although I suppose that should be "RTWFM"...]
« Last Edit: October 23, 2022, 05:49:50 PM by aaronji »

Offline fandelive

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 480
  • I'm a llama!
Re: In Need of A Stealth Taping Doctor
« Reply #47 on: October 28, 2022, 10:19:18 AM »
All those Sennheiser MKx mics are build using high sensivity capsules, which means they can't handle high SPLs.

You'll need to mod them. 4.7k.
And then you'll need a preamp to compensate the gain.
Mics : Sony ECM-717, MM-HLSC-1 (4.7k mod), SP-CMC-4 (at853), 2x DPA4060, 2x DPA4061
Battery box : SP-SPSB-6524 w/bass roll-off filter, MM-CBM-1
Preamp : Church Audio CA-9100
Recorders : Sony MZR-700PC, Edirol R-09HR, Tascam DR-2d

Offline beatkilla

  • Trade Count: (64)
  • Needs to get out more...
  • *****
  • Posts: 2040
  • Gender: Male
Re: In Need of A Stealth Taping Doctor
« Reply #48 on: October 28, 2022, 06:29:39 PM »
All those Sennheiser MKx mics are build using high sensivity capsules, which means they can't handle high SPLs.

You'll need to mod them. 4.7k.
And then you'll need a preamp to compensate the gain.


The Sennheiser MKE-2 Gold series can handle 142db with 7.5 volts of power.

No MOD is needed .

I have MKE-Platinum,MKE-1,MKE-2,MKE-2 Gold and all can withstand the loudest stacks you can encounter with a 9 volt battery box.

I see MM in your sig and the senn capsules they used are not the same as Sennheiser mke-2.

Offline moondust.and.solitude

  • Trade Count: (1)
  • Taperssection Regular
  • **
  • Posts: 86
  • Gender: Male
  • Holding hands singing kumbaya
Re: In Need of A Stealth Taping Doctor
« Reply #49 on: October 28, 2022, 08:32:46 PM »
All those Sennheiser MKx mics are build using high sensivity capsules, which means they can't handle high SPLs.

You'll need to mod them. 4.7k.
And then you'll need a preamp to compensate the gain.


The Sennheiser MKE-2 Gold series can handle 142db with 7.5 volts of power.

No MOD is needed .

I have MKE-Platinum,MKE-1,MKE-2,MKE-2 Gold and all can withstand the loudest stacks you can encounter with a 9 volt battery box.

I see MM in your sig and the senn capsules they used are not the same as Sennheiser mke-2.

Beatkilla is 100% correct in his statement.
Mics: Lewitt LCT-040; Naiant X-X Omni's; Audio Technica U853AW's; Sony ECM-166BMP's; Audio Technica AT-853's.
Cables: Gotham GAC-4/1 Cables; UniStar LilRed Whip.
Recorders: Tascam DR-100mkIII; Sony PCM-A10.
Misc: Samsung EVO Plus 128GB SDXC Card.

Offline checht

  • Trade Count: (5)
  • Taperssection Member
  • ***
  • Posts: 594
  • Old and in the Way
Re: In Need of A Stealth Taping Doctor
« Reply #50 on: November 13, 2022, 06:49:54 PM »
Curious, how do these sound compared to the usual suspects, DPAs and Schoeps omnis?

Thx
Schoeps MK41s > nbob KCY >
Naiant PFA 60v > Sound Devices MP-6II -OR- Naiant IPA > Sony PCM-A10
Vanguard V1s matched pair
Niaint x8
Recordings at LMA

 

RSS | Mobile
Page created in 0.039 seconds with 28 queries.
© 2002-2022 Taperssection.com
Powered by SMF