Become a Site Supporter and Never see Ads again!

Author Topic: Burning Software  (Read 8581 times)

0 Members and 1 Guest are viewing this topic.

Offline blu666z

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 3277
  • AT ES943(H/C/O caps) » JKLab PP9 Pre » wmod UA-5
Burning Software
« on: April 23, 2003, 10:36:57 PM »
Not sure whether I should put this here or in Media Trading.  I use EZ CD Creator.  Been working like a champ until a couple days ago.  It used to always keep the buffer at 100%.  Now it almost immediately drops to 1% and stays there until its done.  Anybody ever run into this problem?  Reinstall?

-Kevin

jpschust

  • Guest
  • Trade Count: (0)
Re:Burning Software
« Reply #1 on: April 24, 2003, 12:54:54 AM »
save yourself a lot of hassle and start using nero... does everything ezcd does and more.  just remember- when burning audio you need to reset from 2 second gaps down to zero for DAO.

Offline blu666z

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 3277
  • AT ES943(H/C/O caps) » JKLab PP9 Pre » wmod UA-5
Re:Burning Software
« Reply #2 on: April 24, 2003, 12:57:29 AM »
Thats what I've been using tonite.  Very impressed.  I am changing all the tracks to 0 except for the 1st.  That is correct, right?

-Kevin

Offline zhianosatch

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 8992
  • Gender: Male
  • god-damned hippies!
Re:Burning Software
« Reply #3 on: April 24, 2003, 02:19:55 AM »
Nero is fine, but now that I've discovered Feurio I'll only go back in some catastrophe!

Offline zhianosatch

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 8992
  • Gender: Male
  • god-damned hippies!
Re:Burning Software
« Reply #4 on: April 24, 2003, 02:25:36 AM »
I am changing all the tracks to 0 except for the 1st.  That is correct, right?

Yep. And Easy CD Creator is a piece of shit.

Offline silentmark

  • Shine with or without cherries ?
  • Trade Count: (5)
  • Needs to get out more...
  • *****
  • Posts: 2685
  • Gender: Male
  • Boat, cucumber, wire ...
Re:Burning Software
« Reply #5 on: April 24, 2003, 08:23:22 AM »
I am changing all the tracks to 0 except for the 1st.  That is correct, right?

Yep. And Easy CD Creator is a piece of shit.

I have been using EZ since like ver 4 & never had a problem, to each his own I suppose  ::)
Dissent is the highest form of patriotism. - Howard Zinn, not Thomas Jefferson ...

Mics: Neumann AK50/AK40/AK30/AK20(1 for M/S), AKG568eb's (gathering dust)
Decks: R-44 (OCM), Fostex FR2LE (OWM), Microtacker (semi-retired), D8 (retired), D7 (retired)
Pre-amps: Apogee Minime (semi-retired), Sonosax SX-M2 (semi-retired), Oade mod SBM-1 (retired)
Cables: LC3 actives (older lemo style x2), Audio Magic Hyper Conductor interconnects

http://www.youtube.com/watch?v=J3qrWOOposQ

Offline RRobar

  • Mac Design Geek
  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 5197
  • Gender: Male
  • "It's allgood ....brah!"
    • Headway Graphixx
Re:Burning Software
« Reply #6 on: April 24, 2003, 12:34:00 PM »
New versions of EZCD keep a database file about what you've ripped (if you use it for that) there are also a few other anti copying things in place. I won't use it for that reason alone. I use Nero  I liked Feurio for audio burns but when I got my new PC a year ago the cdrw drive was not supported. I'm sure it is now but Nero worked fine so I've stuck with it. I used to run feurio for audio discs and nero for data. Now it's just Nero
Need Graphic Design Work? Goto http://www.headwaygraphixx.com

Offline silentmark

  • Shine with or without cherries ?
  • Trade Count: (5)
  • Needs to get out more...
  • *****
  • Posts: 2685
  • Gender: Male
  • Boat, cucumber, wire ...
Re:Burning Software
« Reply #7 on: April 24, 2003, 01:09:39 PM »
New versions of EZCD keep a database file about what you've ripped (if you use it for that) there are also a few other anti copying things in place. I won't use it for that reason alone. I use Nero  I liked Feurio for audio burns but when I got my new PC a year ago the cdrw drive was not supported. I'm sure it is now but Nero worked fine so I've stuck with it. I used to run feurio for audio discs and nero for data. Now it's just Nero

I just use it for burning & EAC for extraction ...
Dissent is the highest form of patriotism. - Howard Zinn, not Thomas Jefferson ...

Mics: Neumann AK50/AK40/AK30/AK20(1 for M/S), AKG568eb's (gathering dust)
Decks: R-44 (OCM), Fostex FR2LE (OWM), Microtacker (semi-retired), D8 (retired), D7 (retired)
Pre-amps: Apogee Minime (semi-retired), Sonosax SX-M2 (semi-retired), Oade mod SBM-1 (retired)
Cables: LC3 actives (older lemo style x2), Audio Magic Hyper Conductor interconnects

http://www.youtube.com/watch?v=J3qrWOOposQ

Offline wbaldwin

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 334
  • Gender: Male
  • giddyup!
    • My Trading List
Re:Burning Software
« Reply #8 on: April 25, 2003, 11:15:55 AM »
I agree, EAC should DEFINITELY be used for extraction....  its the only one that does an adequate job.

I generally use it for burning as well, but as of the last version 0.9pb4 Andre had not added support for many of the new generation CD-R/DVD (LG in my Dell  :() combo drives in laptops, so burning is not an option there yet.  It does work for extracting though.

He has just released a new 0.95 beta though, which I have not tried yet.

I used to use EZCDC, and produced a disturbing amount of coasters.  After switching to EAC on my desktop machines, that business virtually dissapeared.  Can't wait until I can get it going for burning on my laptop, now that I'm doing the 24/96 thing.  Transferring all of those large files to the desktops is becoming a hassel!!

Offline zhianosatch

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 8992
  • Gender: Male
  • god-damned hippies!
Re:Burning Software
« Reply #9 on: April 25, 2003, 04:02:36 PM »
I've just found that you can't really do jack with Easy CD Creator. Nero and especially Feurio actually give lots of options and have navigable user interfaces and don't make everything simple, thereby trapping the user... needless to say, Easy CD Creator pissed me off in the day. ;) But definitely, to each his own.

And yes, only EAC in Secure for extraction.

Offline RRobar

  • Mac Design Geek
  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 5197
  • Gender: Male
  • "It's allgood ....brah!"
    • Headway Graphixx
Re:Burning Software
« Reply #10 on: April 27, 2003, 10:15:35 PM »
I also only use EAC for extractiosn when I need to all set up right. I was simply saying that EZCD has spyware that it tracking you if you do use it to rip a show. I don't do any such thing, But that type of stuff bugs me. WHich is why I don't use it.
Need Graphic Design Work? Goto http://www.headwaygraphixx.com

Offline zhianosatch

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 8992
  • Gender: Male
  • god-damned hippies!
Re:Burning Software
« Reply #11 on: April 27, 2003, 11:25:11 PM »
I was simply saying that EZCD has spyware that it tracking you if you do use it to rip a show. I don't do any such thing, But that type of stuff bugs me. WHich is why I don't use it.

Grrrrrrr... GRRRRRRRRRRRRRRR!!!

Offline zhianosatch

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 8992
  • Gender: Male
  • god-damned hippies!
Re:Burning Software
« Reply #12 on: April 27, 2003, 11:25:42 PM »
It would bug me too.

Offline ducati

  • Trade Count: (3)
  • Taperssection Member
  • ***
  • Posts: 572
  • I'm a llama!
Re:Burning Software
« Reply #13 on: April 28, 2003, 12:00:55 PM »
I used EZCD for about 3-4 years with NO problems.  Then, one day, same as you.  Coasters all over the place.  I tried reinstalling, no dice.  I bought a new burner, and happened to try Nero.  Whaddya know, Nero rocks, and my old burner works again.   ::)

I'm sticking with Nero, I think.  I like it MUCH better for DVD burning (than the crap that came with my HP) so if you ever buy a DVD burner it's great for that, too.

Offline RRobar

  • Mac Design Geek
  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 5197
  • Gender: Male
  • "It's allgood ....brah!"
    • Headway Graphixx
Re:Burning Software
« Reply #14 on: April 28, 2003, 01:48:47 PM »
Roxio is so far up the RIAA's ASS it's not even funny. It's why I won't use any roxio products. Anyone hear of the nero6.0 yet I had heard it was supposed to have dvd-a capabilities. That will be key with me starting to work with 24/48 & 24/96 files.
Need Graphic Design Work? Goto http://www.headwaygraphixx.com

Offline ducati

  • Trade Count: (3)
  • Taperssection Member
  • ***
  • Posts: 572
  • I'm a llama!
Re:Burning Software
« Reply #15 on: April 28, 2003, 01:51:58 PM »
I'm not sure what version I just d/led the trial for, but it has the DVD-A portion greyed out.  Which makes me think it's on it's way.

One big bummer, though, just as with DVD-V discs, you'll need an authoring program to author DVD-A discs before Nero can burn them (unless Nero comes out with an authoring package).  

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40690
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re:Burning Software
« Reply #16 on: April 28, 2003, 05:11:24 PM »
its all about the damn money...buy this, buy that, blah, blah.... >:( but its worth it in the long run.... ;D

sorry, had to get that off of my chest... :D

bean
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

DaryanLenz

  • Guest
  • Trade Count: (0)
Re:Burning Software
« Reply #17 on: April 29, 2003, 01:14:36 AM »
It's never all about the money with software ;) ;)  Bean, I sent you a package today which will shed some light on this ;)

Daryan

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40690
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re:Burning Software
« Reply #18 on: April 29, 2003, 01:37:32 AM »
ah yes, oh so true...but you know what i mean... ;) did i mention you are the man, daryan... ;) cause you are da man...i got you another package that will hopefully make you happy also... 8)

bean
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40690
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re:Burning Software
« Reply #19 on: April 29, 2003, 01:38:36 AM »
daryan,
   +T my phriend... ;D

bean
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

 

RSS | Mobile
Page created in 0.199 seconds with 46 queries.
© 2002-2024 Taperssection.com
Powered by SMF