Become a Site Supporter and Never see Ads again!

Author Topic: Cables / adapters for SBD patching  (Read 13167 times)

0 Members and 1 Guest are viewing this topic.

Offline dklein

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1184
  • Gender: Male
Cables / adapters for SBD patching
« on: November 14, 2004, 10:48:07 PM »
Edit to add (B.Skalinder):  This applies to more than just JB3s, so I'm pulling it out as a standalone post.

Somebody recently asked me what they needed for soundboard recording so I figured I'll pass the picture on to the archives.  This lets you handle most boards (RCA / XLR / 1/4")
« Last Edit: January 20, 2005, 01:05:20 PM by Brian Skalinder »
KM 184 > V2 > R4
older recording gear: UA-5  / emagic A62 / laptop / JB3 / CSB / AD20 / Sharp MT-90 / Sony MDS-JE510
Playback: Pioneer DV-578 > Lucid DA 9624 >many funny little british boxes > Linn Isobarik PMS

Offline golf7

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 44
Re: Cables / adapters for SBD patching
« Reply #1 on: May 11, 2006, 10:14:41 AM »
nice picture there, it really help understand exactly what is needed

Offline 69mako

  • Trade Count: (2)
  • Taperssection Member
  • ***
  • Posts: 645
Re: Cables / adapters for SBD patching
« Reply #2 on: August 17, 2007, 02:14:19 AM »
Thanks for this post.  i'm getting my first opprotunity for a SBD patch and this post explained everything wth pix!!

thanks,
Mako
http://db.etree.org/69mako

007: Church Audio CA-14c -> Church Audio St-9100 preamp -> R-09HR

Open: Busman BSC1 mics (X2) -> Hydra Cables (X2) -> Tmod R4

 

RSS | Mobile
Page created in 0.058 seconds with 32 queries.
© 2002-2024 Taperssection.com
Powered by SMF