Become a Site Supporter and Never see Ads again!

Author Topic: good price on used 603a/ka200n?  (Read 5888 times)

0 Members and 1 Guest are viewing this topic.

Offline C.Clark

  • Rediscovering the Magic!
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 4749
    • Too Many Shows!
Re:good price on used 603a/ka200n?
« Reply #15 on: March 01, 2004, 12:49:14 PM »
I ran mp-2/modsbm-1 and v2/modsbm-1, preferred the V2/modsbm-1.

Ditto.  Much preferred V2 > modSBM01 to the MP2 > modSBM-1.

ran both combo's too and i preferred the v2 > mod sbm-1 as well
Current Rig:
Mics: Neumann SKM184, Neumann SKM185, AKG C414 XLS/ST, DPA ST2015
Recorder: SD MixPre-6ii, SD MixPre-10ii
Extras: SD MixPre-D, SD USBPre2, Sony TCD-D8
-------------------------------------------------------------------------------
Former Rigs:
ADK TL --> Segue Dogstars --> SD 722
AT4051a --> Segue Dogstars --> MP-2 --> SD 722
AT4051a --> V2 --> MiniMe --> VxPocket V2 --> Laptop
AT4051a --> V2 --> MiniMe --> Sony TCD-D100
AT4051a --> V2 --> Mod SBM-1 --> Sony TCD-D100
AT4051a --> MP-2 --> AD1000 --> Sony TCD-D100
AKGC1000s --> Denecke PS/2 --> Denecke AD-20 --> Sony MiniDisc
-------------------------------------------------------------------------------
http://db.etree.org/cpclar

Offline nickgregory

  • Admitted Jeter Homer
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 22376
  • Gender: Male
    • Hurricanes Insider
Re:good price on used 603a/ka200n?
« Reply #16 on: March 01, 2004, 12:58:37 PM »
I ran mp-2/modsbm-1 and v2/modsbm-1, preferred the V2/modsbm-1.

Ditto.  Much preferred V2 > modSBM01 to the MP2 > modSBM-1.

I think the Pre/AD combo is also extremely dependent on the mics you are running with them...

Offline hoyt

  • Trade Count: (5)
  • Taperssection Member
  • ***
  • Posts: 358
  • Gender: Male
    • http://www.the-hoyts.com
Re:good price on used 603a/ka200n?
« Reply #17 on: March 01, 2004, 07:43:14 PM »
Be aware that the pair for sale in the yard sale is not the 603a bodies, but rather the 603 bodies.  No actives can be used with the 603 bodies, they can only be run with the full bodies.  In order to use actives with that setup, new bodies (@ $500 each), along with active cables, would have to be added.

Something to think about...

Are there any sonic differences between the 603's and the 603a's?  So if I ran non actives on each of those bodies, would there be any noticeable difference?  Thanks!

--hoyt
dpa4028/4023/4011er > sx-m2d2/ sx-r4+

 

RSS | Mobile
Page created in 0.062 seconds with 28 queries.
© 2002-2024 Taperssection.com
Powered by SMF