Sort of... I am referring to the markings on the mic...
There are two sets...
For the bottom cap it is 0 if it is aligned with the emblem (for mid side) and it is 45 if it is off center (for x/y)
For the top cap, the markings are in relation to the bottom cap, not the emblem, so they read 90 to zero to 90.
To run x/y you have the top cap facing one 90, that will put the top to the right and the bottom to left...
To run mid side, you need to set the top cap to the other 90, so the positive face is pointing left.
Hope this makes it clearer...
Edit to add:
If you want to use different angles, then you have to do the math and play with the caps, and thus the emblem would not be in the center, which would also meant the set screw in the rear would not be in the center. Now if you use thick enough o rings for the mount, the set screw is redundant, and you can simply aim the mic however, positioning the midpoint wherever it might be...