Become a Site Supporter and Never see Ads again!
« previous next »
Pages: [1]   Go Down

Author Topic: Apogee A/D quality vs. Metric Halo A/D quality  (Read 4128 times)

0 Members and 1 Guest are viewing this topic.

Offline VA_TAPER

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 904
  • Gender: Male
  • SPA AKG C33E->Hamptone HVTP2->Tascam DV-RA1000 DSD
Apogee A/D quality vs. Metric Halo A/D quality
« on: February 02, 2004, 05:33:39 AM »
Any tests been done?  Any comp. tapes?

peace, chris
Logged
My recordings and transfers at archive.org: http://www.archive.org/search.php?query=berryman%20AND%20mediatype%3Aetree%20AND%20collection%3Aetree

“Those who cast the votes decide nothing. Those who count the votes decide everything.”  Joseph Stalin

Offline MattD

  • Taper Emeritus
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 4634
  • Gender: Male
Re:Apogee A/D quality vs. Metric Halo A/D quality
« Reply #1 on: February 02, 2004, 08:50:33 AM »
I'll be happy to A/B them if someone in the DC area can loan me a Mini-Me. I have done a non-scientific A/B (set to set) from a show last year, but it was a whole unit comparison, not A/D only. I deleted that because the bands (2 openers) sucked enough that I couldn't listen to it again.

IMO, on unit-to-unit, the MH is more detailed and the Apogee is warmer overall and "fatter" in the low end.

Can the Mini-Me take a line level signal on the XLR ins or only on via 1/4"?
Logged
Out of the game … for now?

Offline scb

  • Eli Manning should die of gonorrhea and rot in hell. Would you like a cookie, son?
  • Trade Count: (11)
  • Needs to get out more...
  • *****
  • Posts: 8677
  • Gender: Male
Re:Apogee A/D quality vs. Metric Halo A/D quality
« Reply #2 on: February 02, 2004, 09:08:48 AM »
>>Can the Mini-Me take a line level signal on the XLR ins or only on via 1/4"<<

only on the xlrs.  the 1/4 can't take a line level at all
Logged

Offline MattD

  • Taper Emeritus
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 4634
  • Gender: Male
Re:Apogee A/D quality vs. Metric Halo A/D quality
« Reply #3 on: February 02, 2004, 10:37:36 AM »
It seems like I have the cables to do this as well.

Mic > ULN-2 > laptop
Mic > ULN-2 > Send > TRS-to-XLR > Apogee > AES > ULN-2 > laptop

I'd clock to the Apogee and let 'er rip. Sounds easy enough if I can deal with the cal pots.
Logged
Out of the game … for now?

Offline scb

  • Eli Manning should die of gonorrhea and rot in hell. Would you like a cookie, son?
  • Trade Count: (11)
  • Needs to get out more...
  • *****
  • Posts: 8677
  • Gender: Male
Re:Apogee A/D quality vs. Metric Halo A/D quality
« Reply #4 on: February 02, 2004, 10:47:40 AM »
>>Sounds easy enough if I can deal with the cal pots.<<

set them to be even with the ULN beforehand.  that way you just set levels on the ULN
Logged

Offline MattD

  • Taper Emeritus
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 4634
  • Gender: Male
Re:Apogee A/D quality vs. Metric Halo A/D quality
« Reply #5 on: February 02, 2004, 11:52:38 AM »
Sounds good to me ... anyone in the DC area have one of these Foreman Apogee grills?
Logged
Out of the game … for now?

Offline VA_TAPER

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 904
  • Gender: Male
  • SPA AKG C33E->Hamptone HVTP2->Tascam DV-RA1000 DSD
Re:Apogee A/D quality vs. Metric Halo A/D quality
« Reply #6 on: February 02, 2004, 12:06:12 PM »
Quote from: MattD on February 02, 2004, 11:52:38 AM
Sounds good to me ... anyone in the DC area have one of these Foreman Apogee grills?

actually I'm in the Richmond area so DC isn't too far to go for a comp.  The reason I was asking is that I've got the chance to pick up a 2882 + DSP for $700.  But I'd need to learn mac quick as I only know pc.  What type of show would you want to catch? Are the a/d's in the ULN the same as the 2882, I know the pre's are different.  I could offer up both the mini-me and a Lunatec 316 to use as pre/phantom and split to the Metric Halo and the Apogee.

peace, chris
Logged
My recordings and transfers at archive.org: http://www.archive.org/search.php?query=berryman%20AND%20mediatype%3Aetree%20AND%20collection%3Aetree

“Those who cast the votes decide nothing. Those who count the votes decide everything.”  Joseph Stalin

Offline the yokel

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 187
  • Gender: Male
Re:Apogee A/D quality vs. Metric Halo A/D quality
« Reply #7 on: February 02, 2004, 12:28:04 PM »
"Can the Mini-Me take a line level signal on the XLR ins or only on via 1/4"

"only on the xlrs.  the 1/4 can't take a line level at all"

The Mini-Me can take 1/4" line in, done it plenty of times.  
Logged

Offline scb

  • Eli Manning should die of gonorrhea and rot in hell. Would you like a cookie, son?
  • Trade Count: (11)
  • Needs to get out more...
  • *****
  • Posts: 8677
  • Gender: Male
Re:Apogee A/D quality vs. Metric Halo A/D quality
« Reply #8 on: February 02, 2004, 01:42:29 PM »
at high levels?  the 1/4 is an instrument level input and will overload MUCH easier than the xlr...
Logged

Offline the yokel

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 187
  • Gender: Male
Re:Apogee A/D quality vs. Metric Halo A/D quality
« Reply #9 on: February 03, 2004, 12:51:10 AM »
Well i'm not exactly sure what your deffinition of high level is?  I've ran line in off V2/Sax with probably 25-30db & SBD's  with probably a bit less with plenty of headroom via 1/4".  Are you sure your not thinking the Hi-Z instrument inputs as they are all on the same input socket but the Hi-Z runs through a slightly different amp path.  Atleast that's what i recall reading from Gary @ Apogee.  
Logged

Offline MattD

  • Taper Emeritus
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 4634
  • Gender: Male
Re:Apogee A/D quality vs. Metric Halo A/D quality
« Reply #10 on: February 03, 2004, 09:42:33 AM »
It doesn't matter. I'm using the XLRs :)

Edit for VA Taper:
I am not doing a whole lot in the way of shows past this week, as I'm gonna be out of town for a while. If there's something that looks good at the end of Feb., let me know later.
« Last Edit: February 03, 2004, 09:45:23 AM by MattD »
Logged
Out of the game … for now?

Offline scb

  • Eli Manning should die of gonorrhea and rot in hell. Would you like a cookie, son?
  • Trade Count: (11)
  • Needs to get out more...
  • *****
  • Posts: 8677
  • Gender: Male
Re:Apogee A/D quality vs. Metric Halo A/D quality
« Reply #11 on: February 03, 2004, 10:35:20 AM »
>>I've ran line in off V2/Sax with probably 25-30db & SBD's  with probably a bit less with plenty of headroom via 1/4".  Are you sure your not thinking the Hi-Z instrument inputs as they are all on the same input socket but the Hi-Z runs through a slightly different amp path.  Atleast that's what i recall reading from Gary @ Apogee. <<

i was under the impression that the 1/4 was ONLY hi-z.  maybe the later revision (c and on) changed this.  
Logged
Pages: [1]   Go Up
« previous next »
 

RSS | Mobile
Page created in 0.065 seconds with 36 queries.
© 2002-2024 Taperssection.com
Powered by SMF