Taperssection.com

Gear / Technical Help => Battery Boxes, Preamps, Mixers, ADCs, and Processors => Topic started by: Kush on February 05, 2006, 12:33:00 PM

Title: Oade digi-modded UA5 --> JB3 --> SVUx metering w/o mics?
Post by: Kush on February 05, 2006, 12:33:00 PM

I've been reading up on better ways to control my metering while recording and it looks like running a SVUx out of my JB3 is the best solution. My problem is the calibration of the SVUx, since I don't have any mics yet.

At the moment I'd be running:
SBD > patching cables > Oade digi-modded UA5 > optical cable > JB3 > SVUx

Any suggestions until I get some mics? I've seen some threads where people use this combination and I am wondering how they calibrated their SVUx? Any help will be much appreciated, thanks.

Title: Re: Oade digi-modded UA5 --> JB3 --> SVUx metering w/o mics?
Post by: fozzy on February 05, 2006, 12:35:04 PM

Just feed the UA5 from your stereo

Title: Re: Oade digi-modded UA5 --> JB3 --> SVUx metering w/o mics?
Post by: willndmb on February 05, 2006, 02:26:53 PM

Quote from: fozzy on February 05, 2006, 12:35:04 PM

Just feed the UA5 from your stereo

or from your comp using white noise
just hook a 1/8 from the headphone jack > UA-5

Title: Re: Oade digi-modded UA5 --> JB3 --> SVUx metering w/o mics?
Post by: Kush on February 06, 2006, 08:11:20 PM

Sounds easy enough, I was expecting to hear something a lot different after reading the Team SVUx thread. Big thanks for answering my questions guys. +T

I will report back after I get my SVUx.

Title: Re: Oade digi-modded UA5 --> JB3 --> SVUx metering w/o mics?
Post by: willndmb on February 07, 2006, 12:54:07 PM

Quote from: Kush on February 06, 2006, 08:11:20 PM

Sounds easy enough, I was expecting to hear something a lot different after reading the Team SVUx thread. Big thanks for answering my questions guys. +T

I will report back after I get my SVUx.

with some luck you will get one thats balls on like i did
good luck to you