Taperssection.com
Gear / Technical Help => Battery Boxes, Preamps, Mixers, ADCs, and Processors => Topic started by: deadheadcorey on May 11, 2011, 01:56:09 AM
-
So I just got the UA-5, and I was wondering what is the hi-z/ lo-z function on it. It is right by the XLR inputs and a line goes to it with it giving you the option of picking either one....
-
that only effects the 1/4 in
typically used for guitars and such
-
that only effects the 1/4 in
typically used for guitars and such
Ooohhkay, so I should just leave it at lo-z
-
that only effects the 1/4 in
typically used for guitars and such
Ooohhkay, so I should just leave it at lo-z
Do you use a lot mics with 1/4 cable? Most common is XLR which will stated would not be affected by the switch.
-
that only effects the 1/4 in
typically used for guitars and such
Ooohhkay, so I should just leave it at lo-z
Do you use a lot mics with 1/4 cable? Most common is XLR which will stated would not be affected by the switch.
XLR
-
I have mine set on lo-z FWIW