Taperssection.com

Gear / Technical Help => Battery Boxes, Preamps, Mixers, ADCs, and Processors => Topic started by: Brian Skalinder on April 15, 2006, 04:55:30 PM

Title: ADC COMP: V3 v. V3 > R4
Post by: Brian Skalinder on April 15, 2006, 04:55:30 PM
This thread is for discussion, comments, etc.

See Kickdown post (http://taperssection.com/index.php?topic=63097.0) (locked) for download info.




INTENT
=========================

To allow tapers to hear the different sonic characteristics of the V3 and R4.  The goal was to try to minimize the influence of the R-4 preamp and focus primarily on the ADC comparison.  However, in order to achieve reasonably even levels across both ADCs, I had to apply a very small amount of gain to the R-4.  Of course, one shouldn't decide gear X or Y sounds better based on a single comparison, but hopefully the samples provide some useful listening on the sonic differences the V3 and R4 ADCs.


RECORDING INFO
=========================

Greyboy Allstars
2006-04-14
Chicago, IL - House of Blues

Location     : Center, ~40' back (at SBD), ~8' stand
Mic Config   : NOS (30cm, 90ยบ)
Source A     : Schoeps MK21/KC5/CMC6 > Lunatec V3 (24/48) > MicroTrack 2496
Source B     : Schoeps MK21/KC5/CMC6 > Lunatec V3 analog-out > Edirol R-4 (24/48)

Used Wavelab 5.00a to invert the V3 source due to its reversed polarity.


TRACKS
=========================

t01_mk21-v3.flac
t01_mk21-v3-r4.flac
t02_mk21-v3.flac
t02_mk21-v3-r4.flac


NOTES
=========================

Happy listening!
Title: Re: ADC COMP: V3 v. V3 > R4
Post by: thegreatgumbino on April 16, 2006, 09:36:23 AM
Thanks for the comp, Brian.  I look forward to hearing this.  Hopefully, this is just the beginning of the stock R4 comps.  +T