Become a Site Supporter and Never see Ads again!
« previous next »
Pages: [1]   Go Down

Author Topic: 24/96 issue in Wavelab 4.0  (Read 1305 times)

0 Members and 1 Guest are viewing this topic.

Offline MKHstudios

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 16
24/96 issue in Wavelab 4.0
« on: March 06, 2007, 10:40:13 AM »
I recently made a recording on a SD722 in 24b/96k.  The recording came out very nice.  When I transferred the WAV's into my PC via firewire everything went smooth.  Upon opening those files in Wavelab 4.0 my 3 hour recording was all of a sudden 5 hours long and during playback the speed is way slow (thus the elongated file from 3-5 hours).  Listening back on HD's from the 722 all is fine - I think this must be a Wavelab issue. 

Anyone else run into this?  I did a quick search for other links trying to figure this out - Sorry if this has been discussed.
This is obviously my first venture into 24/96.
« Last Edit: March 06, 2007, 11:15:58 AM by MKHstudios »
Logged
Neumann KM140s~>Aerco~>PCM M1
Neumann KM150s~>SD722
and the newest addition...  Sennheiser MKH8050's

Offline cleantone

  • Trade Count: (2)
  • Taperssection All-Star
  • ****
  • Posts: 1676
  • Gender: Male
Re: 24/96 issue in Wavelab 4.0
« Reply #1 on: March 06, 2007, 11:43:45 AM »
Did WL know it was a 24/96 file you were openng? Sounds like it thinks it was less than that. Could be a header issue.
Logged
ISO: your recordings of The Slip, Surprise Me Mr. Davis and The Barr Brothers. pm me please.

Offline MKHstudios

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 16
Re: 24/96 issue in Wavelab 4.0
« Reply #2 on: March 06, 2007, 07:34:05 PM »
figured it out...

24bit files are bigger  ... can' work with as many at the same time.

Logged
Neumann KM140s~>Aerco~>PCM M1
Neumann KM150s~>SD722
and the newest addition...  Sennheiser MKH8050's
Pages: [1]   Go Up
« previous next »
 

RSS | Mobile
Page created in 0.051 seconds with 28 queries.
© 2002-2024 Taperssection.com
Powered by SMF