Taperssection.com
Gear / Technical Help => Battery Boxes, Preamps, Mixers, ADCs, and Processors => Topic started by: trajhip2000 on August 07, 2007, 06:21:26 PM
-
Anybody know? I couldn't find it in the manual or in any of the reviews, but I probably just missed it. Thanks.
Steve
-
there is a phase invert switch for each channel on the front panel so you should be able to set it however you want
-
there is a phase invert switch for each channel on the front panel so you should be able to set it however you want
oh, is that what those buttons are for? ;D
I've been doing some 4-mic mixes with 744T recordings (sep guitar and bass tracks along with a stereo on-stage pair) and not always getting the results I expect when I add in the instrument channels, so I'm trying to figure out whether that might be a phase issue - therefore, it would be nice to know whether the 5012 outputs are inverting phase or not. Seems to me I read somewhere that transformer-based outputs typically do invert phase, but I might be thinking of tube output stages instead. I have a mail in to Neve but haven't gotten a response yet.
Steve
-
Post when you know. I've always assumed non-inverting unless the phase switch is engaged.
-
Post when you know. I've always assumed non-inverting unless the phase switch is engaged.
you are correct, this is from Neve's director of sales: "The outputs only invert phase if the phase reverse switch is depressed and illuminated."
Steve