Become a Site Supporter and Never see Ads again!

Author Topic: Potentially need Lemo to 5-pin checkup/repair  (Read 3490 times)

0 Members and 1 Guest are viewing this topic.

Offline rigpimp

  • Trade Count: (14)
  • Needs to get out more...
  • *****
  • Posts: 3182
  • Gender: Male
  • Jarts don't kill people!
Potentially need Lemo to 5-pin checkup/repair
« on: June 13, 2022, 06:26:05 PM »
I have narrowed down a low left channel to either my Tinybox V1 or the custom Schoeps cable I use for it.  The cable itself breaks in two with 5-pin mini xlr snap-in style jack. The lemo end screw onto my CCM4s and the other side snaps into the Tinybox. 

I have sent an email to Jon at Naiant to troubleshoot The TB (and possibly upgrade the internal battery packs).  Is there someone that can look at this cable?  I'd hit it with an ohm meter but don't know my way around the lemo side at all.

I can send pics if it helps any.

Package on the way to Nicky for repairs, etc.
« Last Edit: June 16, 2022, 04:23:20 PM by rigpimp »
Mics: Schoeps MK 5 MP, Schoeps MK 8 MP, Schoeps MK 41 MP, KCY 250/5 > PFA
Pre/A>D/P48: Sonosax SX/M2, Sonosax SX/M2-LS, E.A.A. PSP-2, Baby Nbox, Neumann BS48i-2 (for sale)
Recorders: Sound Devices Mixpre-6ii, Sony PCM-A10
Playback: Jolida 1501 Hybrid > McIntosh MX 130 > Von Schweikert VR-4 JR, or Little Dot MK III > Sennheiser HD700


RSS | Mobile
Page created in 0.041 seconds with 24 queries.
© 2002-2024
Powered by SMF