Become a Site Supporter and Never see Ads again!

Author Topic: how do you disassemble a switchcraft ta3f?  (Read 2718 times)

0 Members and 1 Guest are viewing this topic.

Offline grawk

  • Trade Count: (6)
  • Taperssection Member
  • ***
  • Posts: 425
  • Gender: Male
how do you disassemble a switchcraft ta3f?
« on: March 04, 2024, 09:31:05 AM »
I'm trying to build some microdot to ta3f cables for my m2d2, but I can't for the life of me figure out how to disassemble the ta3f.  Anyone have any tips?

https://imgur.com/a/cmPUNWZ



4015gs/4018vlgs/kk14->mma:a d-vice/sonosax minir82/sonosax sx-m2d2/nagra vi/lectrosonics spdr

Offline DavidPuddy

  • Trade Count: (18)
  • Taperssection All-Star
  • ****
  • Posts: 1828
  • If it's too loud, turn it down.
Re: how do you disassemble a switchcraft ta3f?
« Reply #1 on: March 04, 2024, 09:43:00 AM »
The assembly should just pull out of the case. Yank on the part that crimps over the cable and it should come right out.
Mics: mk4v/mk41v/mk22 > CMC1L/Nbobs, MKE2
Preamps: Nbox Platinum ABS, Baby Nbox
Recorders: Mixpre-6 ii, PCM-A10

Offline grawk

  • Trade Count: (6)
  • Taperssection Member
  • ***
  • Posts: 425
  • Gender: Male
Re: how do you disassemble a switchcraft ta3f?
« Reply #2 on: March 04, 2024, 09:47:57 AM »
ok, that got it.  It was just a LOT tighter than I anticipated.  Thanks
4015gs/4018vlgs/kk14->mma:a d-vice/sonosax minir82/sonosax sx-m2d2/nagra vi/lectrosonics spdr

Offline Sebastian

  • Trade Count: (6)
  • Taperssection All-Star
  • ****
  • Posts: 1606
  • Gender: Male
Re: how do you disassemble a switchcraft ta3f?
« Reply #3 on: March 21, 2024, 08:03:36 AM »
For reference, here are the instructions straight from Switchcraft: https://www.switchcraft.com/assets/1/27/Assembly_Instructions_Cord_Plugs.pdf?9016

 

RSS | Mobile
Page created in 0.042 seconds with 27 queries.
© 2002-2024 Taperssection.com
Powered by SMF