Taperssection.com
Gear / Technical Help => Cables => Topic started by: gihl on December 15, 2022, 12:33:05 PM
-
Hi all. :)
I recently purchased a Rode PG2-R Pistol Grip for my AT822 microphone.
- https://rode.com/en/accessories/mounts-grips/pg2-r
- https://rode.com/en/accessories/adaptors-cables/pg2-r-pro-cable
However, to make my own PG2-R Pro cable, I purchased Cable Techniques Low-Profile Right-Angle XLR 3-Pin Female Connector and Switchcraft AAA Series 3-Pin XLR Male Cable-Mount Connector.
- https://www.bhphotovideo.com/c/product/1619873-REG/cable_techniques_ct_bx3f_y_low_profile_right_angle_xlr.html
- https://www.bhphotovideo.com/c/product/929685-REG/switchcraft_aaa3mbauz_aaa_series_3_pin_xlr.html
Now, Should I connect the two XLR connectors as shown in the attached picture?
Your input would be appreciated.
Thanks.
-
Yes. Pin 1 to pin 1 and so on. Be aware - as shown in the pic - that the location of pins 1 and 2 are usually reversed on male vs female connectors.
-
Thank you! :)