Ok - I ran the MR-1 tonight at WSP for the first time and it sounds amazing! I ran into two issues though:
1. The Power indicator only shows the "plug" or "lightning bolt" for about a minute and then it goes back to battery bars, but the battery does not seem to drain. Is this normal when running off an external power source?
Ran it using my VR box set to 5.30 V off an Electrovaya PP160. The Electrovaya went down 20% after about the 3 hours of record time.
2. My right channel cut out 2x - don't know what's going on here as all the cables where tight - i wiggled the 1/8" stereo on my PSP-2 on the first occasion and it came back - on the second occasion I reseated the 1/8" TRS connector on the MR-1 and it came back
FWIW - Ran 13th row ROC (as close to Center as possible) about 7.5" high MK41 > KC5 > CMC6xt > EAA PSP-2 > MR-1
What DSD filter setting should I run? I ran filter 1
Very sticky sounding!!!