Become a Site Supporter and Never see Ads again!

Author Topic: HELP: vxPocket users  (Read 1717 times)

0 Members and 1 Guest are viewing this topic.

Offline phatDats4u

  • Balloon Slayer
  • (1)
  • Taperssection Regular
  • **
  • Posts: 172
  • Gender: Male
  • The best things are not things
HELP: vxPocket users
« on: February 03, 2007, 11:40:28 AM »
Taped JMp last night. It went well except for the plan to tape to the lappy, I couldn't get signal from the UA-5 coax out >:(. Any thoughts?
MC930's > Mini-Me > MTII

My shows on archive

Offline cleantone

  • (2)
  • Taperssection All-Star
  • ****
  • Posts: 1676
  • Gender: Male
Re: HELP: vxPocket users
« Reply #1 on: February 03, 2007, 11:46:38 AM »
I have found that depending on the order things are patched and turned on I have to open the VX Control and switch from digital to analog and back to digital. This is done with the recording software open. That is of course assuming all of your internal routing on your laptop was proper. I assume you've done it at home?
ISO: your recordings of The Slip, Surprise Me Mr. Davis and The Barr Brothers. pm me please.

stirinthesauce

  • Guest
  • (0)
Re: HELP: vxPocket users
« Reply #2 on: February 03, 2007, 11:52:21 AM »
yup, strange things happen when laptop taping sometimes.  Especially when running multiple channels.  Always check your routing, soundcard/interface settings.  If all still fails, reboot and start the process over.

+t for the headache

Offline Professor chaos

  • (1)
  • Taperssection Regular
  • **
  • Posts: 225
  • Gender: Male
  • "Bringer of distuction and disorder."
Re: HELP: vxPocket users
« Reply #3 on: February 12, 2007, 05:18:04 PM »
did you try downloading another driver from the digigram website? the only one that worked for me was the oldest one. also click on the digigram logo aon the tool bar and make sure that the card is set for digital in. the default is for analog in. i hope this helps, these were the things that i needed to change in order to get mine working. let me know how you make out.
Microtech Gefell SMS 2000 M20/m21->Oade M148/248->Korg MR-1000/Sony PCM M-10

Offline OFOTD

  • Amorican
  • (7)
  • Needs to get out more...
  • *****
  • Posts: 6307
Re: HELP: vxPocket users
« Reply #4 on: February 12, 2007, 06:03:10 PM »
Which are you running the V2 or 440?

Offline phatDats4u

  • Balloon Slayer
  • (1)
  • Taperssection Regular
  • **
  • Posts: 172
  • Gender: Male
  • The best things are not things
Re: HELP: vxPocket users
« Reply #5 on: February 12, 2007, 07:07:26 PM »
Hey there good folks-it's a V2 card, and I've been having better luck since the JMP rochester show also.  I've found that adjusting the ASIo driver several times and a reboot will fix the problem. I hate mac's, but for this purpose they almost seem apealing after having windows freeze, shut down, etc.
MC930's > Mini-Me > MTII

My shows on archive

Offline hzgone

  • (3)
  • Needs to get out more...
  • *****
  • Posts: 2193
  • Gender: Male
Re: HELP: vxPocket users
« Reply #6 on: February 15, 2007, 12:14:42 AM »
+T for your troubles.  The only problem i have had with the vxpocket is making sure i have the right bit rate selected when i start a new file.
http://db.etree.org/hzgone
http://dead.no-ip.info

AKG 391's>MiAGi-II Silver Cables>V3>VX Pocket V2>Fujitsu 2110

on hiatus, semi retired, injured reserve, got hitched, had 2 kids, broke as hell, & my life is over patcher stage of life...

Offline tim in jersey

  • Site Supporter
  • (8)
  • Needs to get out more...
  • *
  • Posts: 3642
  • Gender: Male
Re: HELP: vxPocket users
« Reply #7 on: February 15, 2007, 11:13:41 AM »
I feel your pain phatDATS.

I sure don't miss dealing w/ that at shows. Yuck.

 

RSS | Mobile
Page created in 0.043 seconds with 32 queries.
© 2002-2021 Taperssection.com
Powered by SMF