« Reply #5 on: September 14, 2009, 03:17:43 AM »
I've got a H320 that I want to use with some sp cmc-8 mics, I cant get a hot enough signal out of the sp batt. box... any suggestions on a new box or is it possible to modify the one I have?
Are you recording really quiet sources? The sp-cmc-8 mics are pretty hot, I can't recall ever having an issue with signal on my iriver (or dat, or edirol for that matter).
Interesting! Deadhoarse, how much gain do you usually have to add in your iriver, going CMC-8>bbox>H320?
A CA-9100 pre works great with the H320. Provides 20 dB clean gain for quiet stuff.
IIUC; the CA-9100 provides 30dB of gain. Maybe fmaderjr doesn't regard the the last 10dB as clean though?! ;-)
« Last Edit: September 15, 2009, 04:39:51 AM by sunjan »
Logged
Mics: A-51s LE, CK 930, Line Audo CM3, AT853Rx (hc,c,sc), ECM 121, ECM 909A
Pres: Tinybox, CA-9100, UA5 wmod
Recorders: M10, H116 (CF mod), H340, NJB3
Gearbag: High Sierra Corkscrew
MD transfers: MZ-RH1. Tape transfers: Nak DR-1
Photo rig: Nikon D70, 18-70mm/3.5-4.5, SB-800