Topic: iRiver H120 CF Mod Attempt - Success!

[jbell]

Will this work to do a CF mod?

http://www.dealextreme.com/p/cf-to-1-8-ide-hard-drive-adapter-18463

[EarlyMorningRain]

yep, that'll work. Ordering from them takes about a month before it arrives though. Actually, I think I have a spare one of those if you want me to track it down. New and still in the bag that is. You'll get it much quicker if you are in a hurry.   

[jbell]

I'm interested!  LMK

yep, that'll work. Ordering from them takes about a month before it arrives though. Actually, I think I have a spare one of those if you want me to track it down. New and still in the bag that is. You'll get it much quicker if you are in a hurry.   

[david8866]

What speed of CF card do you guys use? My Creative Zen Jukebox 3 does not take higher than 133x. I already "wasted" two higher speed cards.

[jbell]

What size and type of card?  Do you want to sell them?

What speed of CF card do you guys use? My Creative Zen Jukebox 3 does not take higher than 133x. I already "wasted" two higher speed cards.

[jbell]

I have bootloader 6 on my iriver.  How do I get the 7pre4 bootloader so I can perform the CFmod?  Thanks for any help. 

[sunjan]

The bootloader is here:
http://www.rockbox.org/wiki/IriverFlashing#Issues_with_the_bootloader

You might want to read this thread too:
http://forums.rockbox.org/index.php?topic=24118.0

[jbell]

Thanks that's what I was looking for!

The bootloader is here:
http://www.rockbox.org/wiki/IriverFlashing#Issues_with_the_bootloader

You might want to read this thread too:
http://forums.rockbox.org/index.php?topic=24118.0

[EarlyMorningRain]

I have bootloader 6 on my iriver.  How do I get the 7pre4 bootloader so I can perform the CFmod?  Thanks for any help.

ok, you cross posted this in the Team iRiver thread as well, which is where I responded with this link
http://www.rockbox.org/wiki/CFModGuide

[jbell]

Sunjan thanks for the help!  I got 7pre4 bootloader installed and flashed the new firmware.  I'm just whating on my CF adapter and I can perform the mod.  Much appreciated.

The bootloader is here:
http://www.rockbox.org/wiki/IriverFlashing#Issues_with_the_bootloader

You might want to read this thread too:
http://forums.rockbox.org/index.php?topic=24118.0

[EarlyMorningRain]

^ sent out today!

[jbell]

Anyone have an extra CF adapter they can let go of! 

[pdastoor]

kinda off topic but is there any possible way to record at 96k on an iriver h120?

[jbell]

^ no only 44.1 and 48

[Big Muff]

interesting stuff..

I just did the mod with a wintec 32g CF : http://www.newegg.com/Product/Product.aspx?Item=N82E16820161369&Tpk=wintec%2032g%20cf

used the the 7pre4 bootload, firmware version 3.7.1, all works out well..

I don't know if this has been tried before, but i put an older version from a v.6 bootloader, daily build from 5/07.
I wanted to use my old settings/fonts/ and most importantly the REP.

So, after completing the mod, i then made a backup of the new version, and copied the older build files to the CF. when i disconnected, it was running the old-timey rockbox like a champ!

REP is back in style.

Cheers!