Become a Site Supporter and Never see Ads again!

Author Topic: My JB3 festival power rig  (Read 15153 times)

0 Members and 1 Guest are viewing this topic.

Offline bhtoque

  • Trade Count: (3)
  • Needs to get out more...
  • *****
  • Posts: 3308
  • Gender: Male
  • So much music, so little time.
Re: My JB3 festival power rig
« Reply #15 on: March 03, 2005, 08:07:43 PM »
What's the part number on that first pic? I searched the shacks site and can't find it anywhere. Just picked up the creative car adaptor and would love to be able to use it for remote power.


I could not track it down on their site. Looks like it may be discontinued. My advice is to check your local store, and if you find any buy them all.

Worst case, you can just hack the lighter end off the car adapter and hard wire some other type of connector. That sucks though, because it has a built in fuse, and you couldn't use it in the car after you hack it.

JAson
MG 200/210/270
AKG c422>s42>Hydra silver interconnects
AKG 391/92/93>MK 90/3 actives
>AM Hyper-Conductors
Studio Projects LSD2>MiAGi II
>Edirol R-4 (Oade T Mod)

db.etree.org/bhtoque

Offline The Kilted Taper

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 2344
  • Gender: Male
  • Real men wear kilts.
Re: My JB3 festival power rig
« Reply #16 on: March 03, 2005, 08:38:28 PM »
What's the part number on that first pic? I searched the shacks site and can't find it anywhere. Just picked up the creative car adaptor and would love to be able to use it for remote power.

Worst case, you can just hack the lighter end off the car adapter and hard wire some other type of connector. That sucks though, because it has a built in fuse, and you couldn't use it in the car after you hack it.

JAson

Yeah, that really isn't an option. Well, I mean it is, but that's not what I wanna do. Thanks for looking though. Just like Starbucks, there's a rat shack on every corner here....
"The guy who's been dissed, dismissed and demoted so often that he should have officially changed his first name to "Backup." "

Offline bhtoque

  • Trade Count: (3)
  • Needs to get out more...
  • *****
  • Posts: 3308
  • Gender: Male
  • So much music, so little time.
Re: My JB3 festival power rig
« Reply #17 on: March 03, 2005, 08:48:00 PM »
Well, after a big waste of time (the sales kids were watching bum fights on the store's internet kiosk) it seems very likely that the part is discontinued.

However part #22-540 will work instead. It comes with banana plugs, but you can snip them off and wire to the battery however you want. Then plug the car adapter into it.

JAson

MG 200/210/270
AKG c422>s42>Hydra silver interconnects
AKG 391/92/93>MK 90/3 actives
>AM Hyper-Conductors
Studio Projects LSD2>MiAGi II
>Edirol R-4 (Oade T Mod)

db.etree.org/bhtoque

Offline Fatah Ruark (aka MIKE B)

  • Trade Count: (11)
  • Needs to get out more...
  • *****
  • Posts: 9940
  • Gender: Male
  • I dream in beige.
    • sloppy.art.ink
Re: My JB3 festival power rig
« Reply #18 on: March 03, 2005, 10:38:46 PM »
Nice Rival Schools sticker. A good friend of mine is married to Ian Love (no longer in the band).

MIKE B
||| MICS:  Beyer CK930 | DPA 4022 | DPA 4080 | Nevaton MCE400 | Sennheiser Ambeo Headset |||
||| PREAMPS: DPA d:vice | Naiant Tinybox | Naiant IPA |||
||| DECKS: Sound Devices MixPre6 | iPod Touch 32GB |||
|||Concert History || LMA Recordings || Live YouTube |||

Offline bhtoque

  • Trade Count: (3)
  • Needs to get out more...
  • *****
  • Posts: 3308
  • Gender: Male
  • So much music, so little time.
Re: My JB3 festival power rig
« Reply #19 on: March 03, 2005, 10:50:52 PM »
Nice Rival Schools sticker. A good friend of mine is married to Ian Love (no longer in the band).

MIKE B

They tore it up live. But it's been a long time since I heard anything about them.

JAson
MG 200/210/270
AKG c422>s42>Hydra silver interconnects
AKG 391/92/93>MK 90/3 actives
>AM Hyper-Conductors
Studio Projects LSD2>MiAGi II
>Edirol R-4 (Oade T Mod)

db.etree.org/bhtoque

Offline alienbobz

  • Trade Count: (3)
  • Taperssection All-Star
  • ****
  • Posts: 1149
  • Gender: Male
Re: My JB3 festival power rig
« Reply #20 on: March 09, 2005, 02:50:01 AM »
Anyone tried this with the UA5? Guessing it would work ok. I have a car charger that I bought from Wal Mart that does 9v so I could do threw this method. Thinking of trying out the Wall Mart battery for my JB3. Probably will do a festival in July so wanted to figure this out before then.
-Out of the game for a bit, probably forever-

Audio Setup:
Apogee Mini-MP
Zoom H6

Video Setup:
Canon Vixia HF G20
Rode NTG-2
Azden SGM-1X

Misc:
Behringer C-2s, Marshall MXL 1006BPs, Naiant MSH-1s

Offline bhtoque

  • Trade Count: (3)
  • Needs to get out more...
  • *****
  • Posts: 3308
  • Gender: Male
  • So much music, so little time.
Re: My JB3 festival power rig
« Reply #21 on: March 09, 2005, 09:59:28 AM »
Anyone tried this with the UA5? Guessing it would work ok. I have a car charger that I bought from Wal Mart that does 9v so I could do threw this method. Thinking of trying out the Wall Mart battery for my JB3. Probably will do a festival in July so wanted to figure this out before then.

The UA-5 will run fine from 9 to 12v You don't need an adapter, just cable it up like the pics of the wally-world 9v that has had a couple threads of it's own.

The only thing you should think about is an in-line fuse, but we should all have them in every one of our power cables already  ;)

JAson
MG 200/210/270
AKG c422>s42>Hydra silver interconnects
AKG 391/92/93>MK 90/3 actives
>AM Hyper-Conductors
Studio Projects LSD2>MiAGi II
>Edirol R-4 (Oade T Mod)

db.etree.org/bhtoque

Offline momule

  • Trade Count: (4)
  • Needs to get out more...
  • *****
  • Posts: 2178
  • Gender: Male
Re: My JB3 festival power rig
« Reply #22 on: March 10, 2005, 04:59:59 PM »
this is how I run mine aswell.
I run the Ua-5 and two Jb3's off of them.
I have (2) 12v7Ah and (4) 12v5Ah   I ran the two 7Ah last year at wakarusa for over 20 hours
I got a killer deal on the 5Ah brand new on ebay (all 4 shipped for $15 ) so I picked them up aswell  ::)
And the more I thought about it I could power the Jb3 at the campsite by one of them and playback the show from earlier that day while making dinner/lunch at the campsite.. without draining the internals or using needed juice from the 7Ah 's

heres a rough pic of my batt set up.. I used the adapta plugs and they were both black so I got the idea to take some of the My girlfriends red fingernail polish and make a line so it would be almost  ;) stupid proof in the dark at a show. you can kinda see it look at the top of the Jb3 (see the red line) on the adapta plug going into the back of the Jb3, just make sure the red line comes together and were golden..

cables are (2) 10ft mogami and a single 25ft AT cable ,just to show size reference  (Thanks to Nick M for the deal on the AT cables )..
« Last Edit: March 10, 2005, 07:14:43 PM by Momule (AKA powerboatman) »
AKG 463's (uno ck62) > Mackie Onyx Satellite > Microtrack II

Offline momule

  • Trade Count: (4)
  • Needs to get out more...
  • *****
  • Posts: 2178
  • Gender: Male
Re: My JB3 festival power rig
« Reply #23 on: March 10, 2005, 05:03:00 PM »
heres how they ride.
AKG 463's (uno ck62) > Mackie Onyx Satellite > Microtrack II

Offline momule

  • Trade Count: (4)
  • Needs to get out more...
  • *****
  • Posts: 2178
  • Gender: Male
Re: My JB3 festival power rig
« Reply #24 on: March 10, 2005, 05:05:32 PM »
heres how the UA-5 rides. it gets its own bag which has now been replaced with a Pelican case

notice the Red Neat-o (screw together) connectors. I can swap out adapta plugs or Rc connectors if needed in a few seconds. 

« Last Edit: March 10, 2005, 05:09:52 PM by Momule (AKA powerboatman) »
AKG 463's (uno ck62) > Mackie Onyx Satellite > Microtrack II

Offline momule

  • Trade Count: (4)
  • Needs to get out more...
  • *****
  • Posts: 2178
  • Gender: Male
Re: My JB3 festival power rig
« Reply #25 on: March 10, 2005, 05:17:29 PM »
here it is packed up like I run it now. (Well sorta) I since plucked the foam so that mics can set on top of each other and piece of foam in between opening up even more room in the case..

and the second (of three Jb3's) rides in this box.
so I now carry a box and a bag full of cables and Batts and everything else..
Not much of "Stealth" setup thats for sure.. But there aint a cable I dont have...  ;D
 I have been to wayyy too many shows and been short a cable or adapter or I would have had a SBD patch to matrix post. Hence why i have 3 Jb'3 ..

I left room to pluck out some extra If I ever find a deal on some ck61's  so the 61's can ride on the mics and the 63's in the squares (where there at now) , the empty hole is for the camera..
its a bit bulky but my stuff is air tight and water proof while storing



« Last Edit: May 15, 2005, 01:52:02 AM by Momule »
AKG 463's (uno ck62) > Mackie Onyx Satellite > Microtrack II

Offline twatts (pants are so over-rated...)

  • <://PHiSH//><
  • Trade Count: (16)
  • Needs to get out more...
  • *****
  • Posts: 9941
  • Gender: Male
  • Lego made a Mini-Fig of me!
Re: My JB3 festival power rig
« Reply #26 on: March 11, 2005, 12:26:00 PM »
I'm owndering what else is available as a car adpater for the JB3.  The Creative car adapter is $40some delivered and that is quite a bit.

I was trying to find a generic adapter, maybe at Walmart, but haven't had much success.

ANybody know where else I can find the 12v to 5v DC/DC adapter with the 2.5 amp output we need???

Thanks,

Terry
***Do you have PHISH, VIDA BLUE, JAZZ MANDOLIN PROJECT or any other Phish related DATs/Tapes/MDs that need to be transferred???  I can do them for you!!!***

I will return your DATs/Tapes/MDs.  I'll also provide Master FLAC files via DropBox.  PM me for details.

Sony PCM R500 > SPDIF > Tascam HD-P2
Nakamichi DR-3 > (Oade Advanced Concert Mod) Tascam HD-P2
Sony MDS-JE510 > Hosa ODL-276 > Tascam HD-P2

******

Offline alienbobz

  • Trade Count: (3)
  • Taperssection All-Star
  • ****
  • Posts: 1149
  • Gender: Male
Re: My JB3 festival power rig
« Reply #27 on: March 11, 2005, 01:42:25 PM »
I have the Powerline car adaptor. I think I spent close to $20 at Wal-Mart for it. Some specs here:

http://k0swi.microlnk.com/REVIEW/PS/POWER%20QWEST%20Digital%202000mAH%20Universal%20Car-Cord%20Adapter.htm

Not sure if Wal-Mart still sells them or not.
-Out of the game for a bit, probably forever-

Audio Setup:
Apogee Mini-MP
Zoom H6

Video Setup:
Canon Vixia HF G20
Rode NTG-2
Azden SGM-1X

Misc:
Behringer C-2s, Marshall MXL 1006BPs, Naiant MSH-1s

Offline alienbobz

  • Trade Count: (3)
  • Taperssection All-Star
  • ****
  • Posts: 1149
  • Gender: Male
Re: My JB3 festival power rig
« Reply #28 on: March 11, 2005, 01:51:17 PM »
Here is another link:

http://www.powerexperts.com/products.html

It is part #0900-21.
-Out of the game for a bit, probably forever-

Audio Setup:
Apogee Mini-MP
Zoom H6

Video Setup:
Canon Vixia HF G20
Rode NTG-2
Azden SGM-1X

Misc:
Behringer C-2s, Marshall MXL 1006BPs, Naiant MSH-1s

Offline twatts (pants are so over-rated...)

  • <://PHiSH//><
  • Trade Count: (16)
  • Needs to get out more...
  • *****
  • Posts: 9941
  • Gender: Male
  • Lego made a Mini-Fig of me!
Re: My JB3 festival power rig
« Reply #29 on: March 11, 2005, 03:02:49 PM »
Neither of those provide 2.4 amps, only 2.0 amps.  Is that going to be a problem???  If not, that's a damn good deal!!!

T

***Do you have PHISH, VIDA BLUE, JAZZ MANDOLIN PROJECT or any other Phish related DATs/Tapes/MDs that need to be transferred???  I can do them for you!!!***

I will return your DATs/Tapes/MDs.  I'll also provide Master FLAC files via DropBox.  PM me for details.

Sony PCM R500 > SPDIF > Tascam HD-P2
Nakamichi DR-3 > (Oade Advanced Concert Mod) Tascam HD-P2
Sony MDS-JE510 > Hosa ODL-276 > Tascam HD-P2

******

 

RSS | Mobile
Page created in 0.084 seconds with 44 queries.
© 2002-2024 Taperssection.com
Powered by SMF