Become a Site Supporter and Never see Ads again!

Author Topic: Broken optical/line in jack on JB3  (Read 1762 times)

0 Members and 1 Guest are viewing this topic.

Offline treydaman

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 40
Broken optical/line in jack on JB3
« on: August 06, 2007, 02:28:07 PM »
So last night I packed up my rig pretty quick and made a stoopid mistake leaving the cable plugged into the jb3.This broke the connection on the inside(outside appears fine) of the optical/line in jack.
When I wiggle the 1/8 inch cable I can get signal but it doesnt stay.
Does anyone know where I may be able to repair this problem?
Thanks for any help.

Offline willndmb

  • Trade Count: (17)
  • Needs to get out more...
  • *****
  • Posts: 6792
  • Gender: Male
Re: Broken optical/line in jack on JB3
« Reply #1 on: August 06, 2007, 03:11:33 PM »
if you are good with a iron you can pop it open and fix it yourself prob - others have done it. common break with the jb3
Mics - AKG ck61/ck63 (c480b & Naiant actives), SP-BMC-2
XLR Cables - Silver Path w/Darktrain stubbies
Interconnect Cables - Dogstar (XLR), Darktrain (RCA > 1/8) (1/8 > 1/8), and Kind Kables (1/8f > 1/4)
Preamps - Naiant Littlebox & Tinybox
Recorders - PCM-M10 & DR-60D

Offline bdasilva

  • Trade Count: (12)
  • Taperssection All-Star
  • ****
  • Posts: 1358
  • Gender: Male
  • Use to be a Fishhead
Re: Broken optical/line in jack on JB3
« Reply #2 on: August 08, 2007, 03:32:59 PM »
I'll fix it for Karma and postage.
Cad E300S set.. AT822  AKG C 414 B-XLS/ST  
Dorsey-Mod MK-012 w/ O, C, H and RED L/D Caps
Superlux S502 ORTF   LSD2
Silverpath  Cables> 
Tascam DR-680MKii    DR- 680 (X2)   Tascam DR-40     Sound Devices USBPre    SONY  PMD-M10   Zoom F8

"Buy a Taper a Drink... Prime the Pumps of live Music"


               On the "music" side of the "Music Business"

Offline rowjimmytour

  • Trade Count: (3)
  • Needs to get out more...
  • *****
  • Posts: 3776
  • Gender: Male
    • My LMA bookmarks
Re: Broken optical/line in jack on JB3
« Reply #3 on: August 08, 2007, 03:37:07 PM »
So last night I packed up my rig pretty quick and made a stoopid mistake leaving the cable plugged into the jb3.This broke the connection on the inside(outside appears fine) of the optical/line in jack.
When I wiggle the 1/8 inch cable I can get signal but it doesnt stay.
Does anyone know where I may be able to repair this problem?
Thanks for any help.
+t for your troubles and hopefully you an fix this fast. I went to kmart and bought a metal cd case and drilled a hole in the side so I could keep my optical line plugged in and store it securely.
Peace
http://www.archive.org/bookmarNo
And the trees are all kept equal
By hatchet, axe and saw

 

RSS | Mobile
Page created in 0.049 seconds with 28 queries.
© 2002-2024 Taperssection.com
Powered by SMF