Become a Site Supporter and Never see Ads again!

Author Topic: Rode Stereo Videomic Pro  (Read 582 times)

0 Members and 1 Guest are viewing this topic.

Offline DavidPuddy

  • (12)
  • Taperssection All-Star
  • ****
  • Posts: 1023
Rode Stereo Videomic Pro
« on: February 05, 2021, 10:31:03 AM »
I know it's a Rode and they aren't the best out there, but does anyone use one of these? I picked one up for travel use (walking 4k video, street market ambiance, etc) at a discounted price and am open to using it at festivals and such if it can handle the SPL and actually sounds decent for music. It has a surprising amount of controls (low cut @ 75hz, -10db, +20db) and runs off of a 9v battery. I'll be using it with a Sony a6400 - I wish the ZS100 had a mic in, which would make it the perfect camera for what we do.

Of course, the shock mount system is garbage - why does pretty much every camera mic out there not have a clamp for the wire? I had to tape it down to get rid of handling noise. I realize these aren't marketed for pro use, but at the prosumer level, you would expect basic functional details.

Offline Craig T

  • (8)
  • Needs to get out more...
  • *****
  • Posts: 4283
    • LMA
Re: Rode Stereo Videomic Pro
« Reply #1 on: February 05, 2021, 11:30:22 AM »
I have one.  It's fine for its intended use, which for me is mostly run and shoot family stuff.  I shot some video at Wanee one year and the audio turned out fine paired with a Panasonic FZ2500.
Schoeps cmc6/4v / Line Audio CM3, OM1 / ADK A51 / Church Audio CA-14
Naiant Tinybox v2.2 / NBox(P) / Apogee Mini-MP / Church Audio ST9200 / CA-UGLY
Sony PCM-M10 / Tascam DR-70D

Offline DavidPuddy

  • (12)
  • Taperssection All-Star
  • ****
  • Posts: 1023
Re: Rode Stereo Videomic Pro
« Reply #2 on: February 12, 2021, 11:35:29 AM »
Thanks Craig, that's what i figured. It should be nice for local shows where I don't want to put a lot of effort into post production.

I'll link an example whenever shows come back and I can film something with my a6400.

 

RSS | Mobile
Page created in 0.028 seconds with 27 queries.
© 2002-2021 Taperssection.com
Powered by SMF