Taperssection.com
Gear / Technical Help => Remote Power => Topic started by: darktrain on March 13, 2010, 09:43:05 AM
-
Looking for a part for the 10-19 dc out on the tekkeon batteries, looked high and low without finding anything for sale? Anyone know. I located this and looks like the right thing but you have to write and inquire the company. Can't find it for sale anywhere.
(http://connector.telecomnet.com.tw/rimages/220/DP-002.jpg)
-
Hi Darktrain,
this connector is made by Kycon:
http://anacapa.kycon.com/Catalog_PDF/KPPX.pdf
Mouser has them in their catalog.
Hope that helps.
Greetings,
Rainer
-
Hey, thanks
-
I put a caliper on the one I have and 10mm across is correct and 6.5 mm plugin distance is right too. Pin placement appears to match.
You can also get the 3' cable from Tekkeon for 7.95
-
I just by new cables from Tekkeon and cut off the end - you have to short one of the small pin to ground (I believe) to turn on the battery the on.
Tekkeon sells right angle connector cables as well - which has a very low profile to it.
-
I just by new cables from Tekkeon and cut off the end - you have to short one of the small pin to ground (I believe) to turn on the battery the on.
Tekkeon sells right angle connector cables as well - which has a very low profile to it.
Thanks for the info, i am building a custom tekkeon to v3 with both side RA so we are going to try the solder end parts, i think they will be easier to mod that way
-
Thanks Rainer!
I needed this info for a cable I'm making.
-MIQ