Taperssection.com
Gear / Technical Help => Battery Boxes, Preamps, Mixers, ADCs, and Processors => Topic started by: Lil Kim Jong-Il on December 30, 2004, 10:26:39 PM
-
Anyone have a manual for the Aerco DB-2? I'd like to get a copy if possible or any info that may be available.
Is it better to run pads on the KM100s and put the Aerco at a higher gain setting or does it not matter?
Really, any help would be appreciated. I haven't had this thing in the field yet and I'm trying to put together a little stealth set up using it and the D7.
thanks,
michael
-
I think you mean MP2. Anyway, there is no manual but rather a one page sheet. If you contact Aerco they will fax or e-mail you one.
Ray
-
This is definitely a DB-2. It's labeled that way on the panel and there is mention of this box in the dat-heads archives. I think it was the predecessor to the MP2. The circuit board in mine is labeled 1994.
Do you have a number or contact info for aerco? The only thing I found was a heating equipment company.
-
Aerco Electronics
(512) 451-5874
7606 Robalo Rd
Austin, TX 78757
-
I have an old MP-2 and I do have a manual for it which I can post on a Web site if you'd like. Great for stealth taping.
dean
Anyone have a manual for the Aerco DB-2? I'd like to get a copy if possible or any info that may be available.
Is it better to run pads on the KM100s and put the Aerco at a higher gain setting or does it not matter?
Really, any help would be appreciated. I haven't had this thing in the field yet and I'm trying to put together a little stealth set up using it and the D7.
thanks,
michael
-
Definitely post it. It should go into the archive forum here too.
BTW Ray, thanks for that contact info. I'm going to call when I get a chance.
-
I have an old MP-2 and I do have a manual for it which I can post on a Web site if you'd like.
If you post it here, I'll add it to the TS Reference section (http://www.taperssection.com/reference/). And if it's too large to attach, email (bskalinder@yahoo.com) it to me instead.