Taperssection.com

Gear / Technical Help => Post-Processing, Computer / Streaming / Internet Devices & Related Activity => Topic started by: wrangler_n_space on August 13, 2003, 09:44:43 AM

Title: Transfering with a UA5
Post by: wrangler_n_space on August 13, 2003, 09:44:43 AM

Can you do transfers from a m1 with it if its modded?

Title: Re:Transfering with a UA5
Post by: cpclark on August 13, 2003, 12:56:21 PM

i use a UA5 for transfers and the digital in works when the usb is connected to the computer, this is what is was designed to do, it was designed in the begginning for standalone use, so you should be fine, just make sure that switch is on s/pdf and your ready to transfer

Title: Re:Transfering with a UA5
Post by: Lee on August 14, 2003, 03:54:25 AM

FWIW the UA-5 will not do a bitperfect transfer

If you still have the 7pin>optical you could record it to the JB3 and dump it over firewire, but that may not be bit-accurate either

Lesser of 2 evils I suppose

Title: Re:Transfering with a UA5
Post by: wrangler_n_space on August 14, 2003, 11:53:38 AM

Thanks lee, i think thats what i'll try.
+t