Taperssection.com
Gear / Technical Help => Battery Boxes, Preamps, Mixers, ADCs, and Processors => Topic started by: hoobash on September 20, 2003, 03:41:51 PM
-
I know there is a website to do the spdif mod. Is possible to replace the preamps??
-
I was talking about the preamps and not the standalone mod
-
I was talking about the preamps and not the standalone mod
I've looked for this information myself. I haven't found it. The best way to figure it out would be to compare the interior of an un-moded unit with one the has the mod.
-
i believe you have to change out surface mounted chips, which, without hotair tools, if almost impossible.
-
Its that hard to pull a chip off a board and replace it?? It doesnt sound hard
i believe you have to change out surface mounted chips, which, without hotair tools, if almost impossible.
-
when it has like >24 contact points, you need some proficiency and practice. i took a soldering class in tech school and the Surface Mount segment was the most difficult. ymmv
-
It is not impossible but extremely difficult. It takes a very steady hand. I used to build circuitboards for a living just out of high school.
-
I recall reading Doug post on his board that he removes all identifying numbers & words from his replacement parts to increase the difficulty for copycats.
-
I recall reading Doug post on his board that he removes all identifying numbers & words from his replacement parts to increase the difficulty for copycats.
And we all thought he wasn't in it for the money...He prett6y much tells you what he does in the descriptions.. Anyone could figure it out if they had enough time and energy to actually research it, take yours apart and look at it.
Daryan
-
i took mine apart before and after i got it warm modded. damned if i can find anything that looks different.
-
Can someone tell me what parts are the preamps???
http://he.fi/photo/ua5-dissection/