Become a Site Supporter and Never see Ads again!

Author Topic: experience with m-audio delta dio 2496  (Read 3683 times)

0 Members and 1 Guest are viewing this topic.

Offline Sean Gallemore

  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 8316
experience with m-audio delta dio 2496
« on: December 24, 2003, 07:04:30 PM »
after I installed the actual card,  I turned on my computer and waited for it to pop up the installation wizard.  For some reason, no matter what I did, my computer would not read the installation info from the CD.

The installation CD claimed it contained drivers for Windows 2000/XP and OSX.    I "explored" the CD and it held 3 files: the pdf, an extraction folder (like winzip but not), and some other unrecognizable file.  However, when I opened the .pdf it only contained instructions for Windows 95/98  ::)

I tried a few other hardware installation options.  It kept saying no setup files could be found.  And it kept wanting me to specify a folder from which it would try to find the setup files.  I selected the CD drive from which the installation CD was inserted but with no luck.  It seemed like the card/computer wizard was telling my computer to look for something on a floppy disk.  So, I extracted the files a Floppy disk.  One problem; once the files are in their extracted state, the total file size is 1.48 MB which unfortunately doesn't fit onto a 1.44 MB floppy  :angry2:

so I put the files onto 2 disks and it seemed like installation was gonna work but it didn't like the interruption caused by having to switch the disks halfway so installation failed (getting closer)

I had previously tried to extract the files onto my harddrive but when I tried to select the folder I had extracted to as the folder I wanted to install from, the window wouldn't let me click ok :(

I tried moving the folder containing the setup files in a few other locations and the blasted thing finally let me select it!  Finally, after searching for drivers on the internet, breaking out the old skool floopies, crapping my pants, taking out the trash, and cursing at my computer, I had defeated my computer in its inceasant quest to deter me from ever making it a bit-perfect machine.

so far I have been able to get it to receive an optical signal from my MD deck.  I guess this is what I get for $100  :D

Offline zhianosatch

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 8992
  • Gender: Male
  • god-damned hippies!
Re:experience with m-audio delta dio 2496
« Reply #1 on: December 24, 2003, 07:14:43 PM »
Is this what people mean when they say that M-Audio's drivers are shit?
That sure was a crappy experience. Did you remember to yell and curse at the computer while you install? That's what works for me.
Ewww... Windows...

Offline Sean Gallemore

  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 8316
Re:experience with m-audio delta dio 2496
« Reply #2 on: December 26, 2003, 01:05:59 AM »
it got a good swearing, for sure :angry:

I forgot to mention, the TOSlink plug doesn't fit into the jack on the card all the way because the plug casing of the TOSlink hits the metal backing where the PCI cards are located.  I will have to do some sawing tomorrow

cpclark

  • Guest
  • Trade Count: (0)
Re:experience with m-audio delta dio 2496
« Reply #3 on: December 26, 2003, 01:46:29 AM »
do they have updated drivers on there website, i would check that out if i already hadnt

jpschust

  • Guest
  • Trade Count: (0)
Re:experience with m-audio delta dio 2496
« Reply #4 on: December 26, 2003, 03:30:59 AM »
yah it can be a bit tricky to get m-audios stuff installed, but when it works it works flawlessly

Offline zhianosatch

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 8992
  • Gender: Male
  • god-damned hippies!
Re:experience with m-audio delta dio 2496
« Reply #5 on: December 27, 2003, 02:22:21 AM »
it got a good swearing, for sure :angry:

I forgot to mention, the TOSlink plug doesn't fit into the jack on the card all the way because the plug casing of the TOSlink hits the metal backing where the PCI cards are located.  I will have to do some sawing tomorrow

dassum good casin'!

Offline save

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1702
  • Gender: Male
  • blah blah blah
Re:experience with m-audio delta dio 2496
« Reply #6 on: January 03, 2004, 02:08:18 AM »
ive never had a problem w/ my m-audio 24/96....i turned off my auto update on windows xp and installed the latest drivers and it's worked w/ out a problem.  ignore the drivers that come w/ the cd....just go to the website and install the latest drivers and you should be good to go!
save

Offline Sean Gallemore

  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 8316
Re:experience with m-audio delta dio 2496
« Reply #7 on: January 04, 2004, 05:37:30 AM »
things are smooth now, I did a bunch of transfers the past few days and things sound great!  having trouble sending a signal out from the s/pdif coax, but that may be my 7pin cable.  s/pdif optical works phantasmally

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40690
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re:experience with m-audio delta dio 2496
« Reply #8 on: January 04, 2004, 06:11:19 AM »
things are smooth now, I did a bunch of transfers the past few days and things sound great!  having trouble sending a signal out from the s/pdif coax, but that may be my 7pin cable.  s/pdif optical works phantasmally

optical output??? good to hear schwill, keep it up bro!!!

every lil upgrade helps!!
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline Sean Gallemore

  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 8316
Re:experience with m-audio delta dio 2496
« Reply #9 on: January 04, 2004, 06:44:50 AM »
yeah, I'm too cheap to run down to rat shack and buy an adapter so my current playback system for tracking is running optical out of my sound card BACK to the MD deck which has a phone jack with level adjust.  so ghetto

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40690
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re:experience with m-audio delta dio 2496
« Reply #10 on: January 04, 2004, 07:21:22 AM »
yeah, I'm too cheap to run down to rat shack and buy an adapter so my current playback system for tracking is running optical out of my sound card BACK to the MD deck which has a phone jack with level adjust.  so ghetto

hey, it works right?? 8)
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline Sean Gallemore

  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 8316
Re:experience with m-audio delta dio 2496
« Reply #11 on: January 04, 2004, 07:26:18 AM »
couldn't ask for more ;D

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40690
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re:experience with m-audio delta dio 2496
« Reply #12 on: January 04, 2004, 09:02:54 AM »
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

 

RSS | Mobile
Page created in 0.059 seconds with 38 queries.
© 2002-2024 Taperssection.com
Powered by SMF