Become a Site Supporter and Never see Ads again!

Author Topic: Ideas for good DC power connectors?  (Read 12160 times)

0 Members and 1 Guest are viewing this topic.

Offline Chuck

  • Trade Count: (42)
  • Needs to get out more...
  • *****
  • Posts: 10810
  • Gender: Male
  • time between the notes...
    • My recordings on the LMA
Ideas for good DC power connectors?
« on: March 12, 2012, 09:23:39 AM »
I'm looking for new connectors to use for DC power cables. I've used 4 pin Neutrik XLRs (slightly too big and bulky) and I'm currently using RCA plugs (easy to use, but don't lock). Though I haven't ever had a problem with them.

Have any of you found a good alternative connector type to use? I'm in the process of re-configuring my batteries and cables and would like to get everything just exactly perfect this time. I'm leaning toward going back to the 4 PIN XLRs.

I even thought of Molex connectors, like those used on IDE hard drives. But, I have read that they are not designed to be plugged and unplugged often.

Any ideas would be appreciated.
Reality is merely an illusion, albeit a very persistent one.

Microphones: AKG C 480 B comb-ULS/ CK 61/ CK 63, Sennheiser MKE 2 elements,  Audix M1290-o, Micro capsule active cables w/ Naiant PFA's, Naiant MSH-1O, Naiant AKG Active cables, Church CA-11 (cardioid), (1) Nady SCM-1000 (mod)
Pre-amps: Naiant littlebox, Naiant littlekit v2.0, BM2p+ Edirol UA-5, Church STC-9000
Recorders: Sound Devices MixPre-6, iRiver iHP-120 (Rockboxed & RTC mod)

Recordings on the LMA: http://www.archive.org/bookmarks/ChuckM
Recording website & blog: http://www.timebetweenthenotes.com

Offline DigiGal

  • AES Associate Member
  • Trade Count: (30)
  • Needs to get out more...
  • *****
  • Posts: 2583
  • Gender: Female
  • Stay healthy and safe!
    • DigiGal Internet Archive Recordings
Re: Ideas for good DC power connectors?
« Reply #1 on: March 12, 2012, 09:50:26 AM »
Mics: AKG CK91/CK94/CK98/SE300 D-330BT | DPA 4060 4061 4266 | Neumann TLM 103 | Senn ME66/K6/K6RD MKE2 MD421 MD431 | Shure VP88 SM7B SM63L SM58 Anniversary Cables: Gotham GAC-4/1 Quad w/Neutrik EMC | Gotham GAC-2pair w/AKG MK90/3 connectors | DigiGal AES>S/PDIF cable Preamp: SD MixPre-D Recorders: SD MixPre 6 | Marantz PMD 661 Edit: 2011 27" 3.4GHz Quad i7 iMac High Sierra | 2020 13" MBA Quad i7 Catalina | Wave Editor | xACT | Transmission | FCP X 

Offline Chuck

  • Trade Count: (42)
  • Needs to get out more...
  • *****
  • Posts: 10810
  • Gender: Male
  • time between the notes...
    • My recordings on the LMA
Re: Ideas for good DC power connectors?
« Reply #2 on: March 12, 2012, 09:53:25 AM »
Thanks DigiGal. They look good, except for the price.
Reality is merely an illusion, albeit a very persistent one.

Microphones: AKG C 480 B comb-ULS/ CK 61/ CK 63, Sennheiser MKE 2 elements,  Audix M1290-o, Micro capsule active cables w/ Naiant PFA's, Naiant MSH-1O, Naiant AKG Active cables, Church CA-11 (cardioid), (1) Nady SCM-1000 (mod)
Pre-amps: Naiant littlebox, Naiant littlekit v2.0, BM2p+ Edirol UA-5, Church STC-9000
Recorders: Sound Devices MixPre-6, iRiver iHP-120 (Rockboxed & RTC mod)

Recordings on the LMA: http://www.archive.org/bookmarks/ChuckM
Recording website & blog: http://www.timebetweenthenotes.com

Offline tgakidis

  • Trade Count: (552)
  • Needs to get out more...
  • *****
  • Posts: 5749
  • Gender: Male
    • My Recordings on the Archive:
Re: Ideas for good DC power connectors?
« Reply #3 on: March 12, 2012, 10:03:16 AM »
Mini xlr?
GAKables: Custom XLR, Digi & Batt Cables http://taperssection.com/index.php?topic=133186.0

Mics: Schoeps CMC6 x 4, Schoeps CMC1K x 2 / Schoeps KC 5G x 2 / Schoeps MK4,MK41,MK21,MK22 x 2 / Austrian Audio OC818 Dual Set+ / Telefunken TF-11 x 2 / Telefunken ELA M 260 x 4 / Telefunken M960FS x 2 / TK60,TK61,TK62 x 2 / Telefunken M60,TK60 x 2 / AKG c426b / AKG c34 / nBob AKG Actives>PFA x 4 / CK61,CK63,CK8 x 2 / AT853 4.7k Mod (Card,Sub)
Pres: Sonosax SX-AD8+ / Sonosax SX-M2D2 / Sonosax SX-M2 / Lunatec V3
Recs: Sonosax SX-R4+ / Sound Devices MixPre-6ii / Marantz PMD-661 / Roland R-07 / Zoom F3

My Recordings: https://archive.org/search.php?query=taper%3A%28Gakidis%29&sort=-da

Offline twatts (pants are so over-rated...)

  • <://PHiSH//><
  • Trade Count: (16)
  • Needs to get out more...
  • *****
  • Posts: 9941
  • Gender: Male
  • Lego made a Mini-Fig of me!
Re: Ideas for good DC power connectors?
« Reply #4 on: March 12, 2012, 10:08:39 AM »
I've recently looked into locking barrel connectors like this one:  http://www.fullcompass.com/product/369666.html

Terry
« Last Edit: March 12, 2012, 10:10:15 AM by twatts and not wearing pants »
***Do you have PHISH, VIDA BLUE, JAZZ MANDOLIN PROJECT or any other Phish related DATs/Tapes/MDs that need to be transferred???  I can do them for you!!!***

I will return your DATs/Tapes/MDs.  I'll also provide Master FLAC files via DropBox.  PM me for details.

Sony PCM R500 > SPDIF > Tascam HD-P2
Nakamichi DR-3 > (Oade Advanced Concert Mod) Tascam HD-P2
Sony MDS-JE510 > Hosa ODL-276 > Tascam HD-P2

******

Offline Chuck

  • Trade Count: (42)
  • Needs to get out more...
  • *****
  • Posts: 10810
  • Gender: Male
  • time between the notes...
    • My recordings on the LMA
Re: Ideas for good DC power connectors?
« Reply #5 on: March 12, 2012, 10:19:50 AM »
Mini xlr?

Yeah, I've thought of using those. That's a good option, I might end up using.

I've recently looked into locking barrel connectors like this one:  http://www.fullcompass.com/product/369666.html

Terry

If there were locking mates for those and they were cheap, that would be good. I have seen the panel mount mates, but not locking cable connectors.
Reality is merely an illusion, albeit a very persistent one.

Microphones: AKG C 480 B comb-ULS/ CK 61/ CK 63, Sennheiser MKE 2 elements,  Audix M1290-o, Micro capsule active cables w/ Naiant PFA's, Naiant MSH-1O, Naiant AKG Active cables, Church CA-11 (cardioid), (1) Nady SCM-1000 (mod)
Pre-amps: Naiant littlebox, Naiant littlekit v2.0, BM2p+ Edirol UA-5, Church STC-9000
Recorders: Sound Devices MixPre-6, iRiver iHP-120 (Rockboxed & RTC mod)

Recordings on the LMA: http://www.archive.org/bookmarks/ChuckM
Recording website & blog: http://www.timebetweenthenotes.com

Offline page

  • Trade Count: (25)
  • Needs to get out more...
  • *****
  • Posts: 8388
  • Gender: Male
  • #TeamRetired
Re: Ideas for good DC power connectors?
« Reply #6 on: March 12, 2012, 10:22:19 AM »
F molex... I hated working on hard drives for that reason.

How about Deans? The resistance loss is really low and they are really cheap. Then do 2 cables that when joined together equal: battery end > deans > gear end. My hobbyshop dude recommended them.
"This is a common practice we have on the bus; debating facts that we could easily find through printed material. It's like, how far is it today? I think it's four hours, and someone else comes in at 11 hours, and well, then we'll... just... talk about it..." - Jeb Puryear

"Nostalgia ain't what it used to be." - Jim Williams

Offline Chuck

  • Trade Count: (42)
  • Needs to get out more...
  • *****
  • Posts: 10810
  • Gender: Male
  • time between the notes...
    • My recordings on the LMA
Re: Ideas for good DC power connectors?
« Reply #7 on: March 12, 2012, 10:44:19 AM »
I have never seen the Deans. Are they locking? Or at least difficult to disconnect?

These might work.
« Last Edit: March 12, 2012, 10:52:54 AM by Chuck »
Reality is merely an illusion, albeit a very persistent one.

Microphones: AKG C 480 B comb-ULS/ CK 61/ CK 63, Sennheiser MKE 2 elements,  Audix M1290-o, Micro capsule active cables w/ Naiant PFA's, Naiant MSH-1O, Naiant AKG Active cables, Church CA-11 (cardioid), (1) Nady SCM-1000 (mod)
Pre-amps: Naiant littlebox, Naiant littlekit v2.0, BM2p+ Edirol UA-5, Church STC-9000
Recorders: Sound Devices MixPre-6, iRiver iHP-120 (Rockboxed & RTC mod)

Recordings on the LMA: http://www.archive.org/bookmarks/ChuckM
Recording website & blog: http://www.timebetweenthenotes.com

Offline ScoobieKW

  • Trade Count: (3)
  • Taperssection All-Star
  • ****
  • Posts: 1664
    • ScoobieSnax Audio Archive
Re: Ideas for good DC power connectors?
« Reply #8 on: March 12, 2012, 10:59:03 AM »
Switchcraft makes locking 1/8th inch connectors. Trs or ts available. Do you need 4 conductors?
Busman BSC1, AT853 (O,C),KAM i2 Chuck Mod (C), Nak 300 (C),
M10, UA-5, US-1800, Presonus Firepod

http://kennedy-williams.net/scoobiesnax/

Offline Chuck

  • Trade Count: (42)
  • Needs to get out more...
  • *****
  • Posts: 10810
  • Gender: Male
  • time between the notes...
    • My recordings on the LMA
Re: Ideas for good DC power connectors?
« Reply #9 on: March 12, 2012, 11:05:01 AM »
Switchcraft makes locking 1/8th inch connectors. Trs or ts available. Do you need 4 conductors?

That would be good too. What's the part number?
I could use 4 pairs.


Edit to add:
They look great, but are pricey.
« Last Edit: March 12, 2012, 11:07:00 AM by Chuck »
Reality is merely an illusion, albeit a very persistent one.

Microphones: AKG C 480 B comb-ULS/ CK 61/ CK 63, Sennheiser MKE 2 elements,  Audix M1290-o, Micro capsule active cables w/ Naiant PFA's, Naiant MSH-1O, Naiant AKG Active cables, Church CA-11 (cardioid), (1) Nady SCM-1000 (mod)
Pre-amps: Naiant littlebox, Naiant littlekit v2.0, BM2p+ Edirol UA-5, Church STC-9000
Recorders: Sound Devices MixPre-6, iRiver iHP-120 (Rockboxed & RTC mod)

Recordings on the LMA: http://www.archive.org/bookmarks/ChuckM
Recording website & blog: http://www.timebetweenthenotes.com

Offline KenH

  • Trade Count: (4)
  • Taperssection Member
  • ***
  • Posts: 777
  • Gender: Male
Re: Ideas for good DC power connectors?
« Reply #10 on: March 12, 2012, 12:06:17 PM »
I use these.  Cheap, easy to setup, don't lock, but rock solid connection.

http://www.radioshack.com/product/index.jsp?productId=3870003
retired

Offline Chuck

  • Trade Count: (42)
  • Needs to get out more...
  • *****
  • Posts: 10810
  • Gender: Male
  • time between the notes...
    • My recordings on the LMA
Re: Ideas for good DC power connectors?
« Reply #11 on: March 12, 2012, 12:21:55 PM »
I really like those and I have bought some to try. The only bad thing is that I have to spice the wire to attach them to existing cables. Which to me isn't ideal.

So far, I really like the Deans plugs. It looks like they make good solid connections, they are cheap and small.

I did find these that appear to improve on the Deans with more gripping (to disconnect) than the Deans:

http://www.ebay.com/itm/10-Pairs-New-Deans-XT-style-Ultra-connector-Plugs-/150764347393?_trksid=m7&_trkparms=algo%3DLVI%26itu%3DUCI%26otn%3D3%26po%3DLVI%26ps%3D63

10 bucks for ten pairs.
Reality is merely an illusion, albeit a very persistent one.

Microphones: AKG C 480 B comb-ULS/ CK 61/ CK 63, Sennheiser MKE 2 elements,  Audix M1290-o, Micro capsule active cables w/ Naiant PFA's, Naiant MSH-1O, Naiant AKG Active cables, Church CA-11 (cardioid), (1) Nady SCM-1000 (mod)
Pre-amps: Naiant littlebox, Naiant littlekit v2.0, BM2p+ Edirol UA-5, Church STC-9000
Recorders: Sound Devices MixPre-6, iRiver iHP-120 (Rockboxed & RTC mod)

Recordings on the LMA: http://www.archive.org/bookmarks/ChuckM
Recording website & blog: http://www.timebetweenthenotes.com

Offline Chuck

  • Trade Count: (42)
  • Needs to get out more...
  • *****
  • Posts: 10810
  • Gender: Male
  • time between the notes...
    • My recordings on the LMA
Re: Ideas for good DC power connectors?
« Reply #12 on: March 12, 2012, 01:35:59 PM »
I just found the Anderson Powerpole connectors. They look ideal. Do any of you have experience with those? They're relatively cheap and look easy to use.

Edit to add photo:

« Last Edit: March 12, 2012, 04:16:51 PM by Chuck »
Reality is merely an illusion, albeit a very persistent one.

Microphones: AKG C 480 B comb-ULS/ CK 61/ CK 63, Sennheiser MKE 2 elements,  Audix M1290-o, Micro capsule active cables w/ Naiant PFA's, Naiant MSH-1O, Naiant AKG Active cables, Church CA-11 (cardioid), (1) Nady SCM-1000 (mod)
Pre-amps: Naiant littlebox, Naiant littlekit v2.0, BM2p+ Edirol UA-5, Church STC-9000
Recorders: Sound Devices MixPre-6, iRiver iHP-120 (Rockboxed & RTC mod)

Recordings on the LMA: http://www.archive.org/bookmarks/ChuckM
Recording website & blog: http://www.timebetweenthenotes.com

Offline Chuck

  • Trade Count: (42)
  • Needs to get out more...
  • *****
  • Posts: 10810
  • Gender: Male
  • time between the notes...
    • My recordings on the LMA
Re: Ideas for good DC power connectors?
« Reply #13 on: March 12, 2012, 04:08:01 PM »
F molex... I hated working on hard drives for that reason.

How about Deans? The resistance loss is really low and they are really cheap. Then do 2 cables that when joined together equal: battery end > deans > gear end. My hobbyshop dude recommended them.

Thanks for getting me to look at RC connectors. I hadn't thought of those. I'm going to pick up some of the HXT 3.5mm connectors locally.
I can get 10 for $4.49
Reality is merely an illusion, albeit a very persistent one.

Microphones: AKG C 480 B comb-ULS/ CK 61/ CK 63, Sennheiser MKE 2 elements,  Audix M1290-o, Micro capsule active cables w/ Naiant PFA's, Naiant MSH-1O, Naiant AKG Active cables, Church CA-11 (cardioid), (1) Nady SCM-1000 (mod)
Pre-amps: Naiant littlebox, Naiant littlekit v2.0, BM2p+ Edirol UA-5, Church STC-9000
Recorders: Sound Devices MixPre-6, iRiver iHP-120 (Rockboxed & RTC mod)

Recordings on the LMA: http://www.archive.org/bookmarks/ChuckM
Recording website & blog: http://www.timebetweenthenotes.com

Offline twatts (pants are so over-rated...)

  • <://PHiSH//><
  • Trade Count: (16)
  • Needs to get out more...
  • *****
  • Posts: 9941
  • Gender: Male
  • Lego made a Mini-Fig of me!
Re: Ideas for good DC power connectors?
« Reply #14 on: March 12, 2012, 04:20:14 PM »
If you're going w/ RC connectors, I probably have some Tamiya Connectors you can have...  http://www.google.com/products/catalog?hl=en&rlz=1G1GGLQ_ENUS249&q=TAMIYA+CONNECTOR&um=1&ie=UTF-8&tbm=shop&cid=5737493381706344421&sa=X&ei=LVpeT6S4FYSYiQL7gK3bBA&ved=0CGsQ8gIwBA#

If not, they are dirt cheap at Rat Shack... 

Terry
***Do you have PHISH, VIDA BLUE, JAZZ MANDOLIN PROJECT or any other Phish related DATs/Tapes/MDs that need to be transferred???  I can do them for you!!!***

I will return your DATs/Tapes/MDs.  I'll also provide Master FLAC files via DropBox.  PM me for details.

Sony PCM R500 > SPDIF > Tascam HD-P2
Nakamichi DR-3 > (Oade Advanced Concert Mod) Tascam HD-P2
Sony MDS-JE510 > Hosa ODL-276 > Tascam HD-P2

******

 

RSS | Mobile
Page created in 0.099 seconds with 40 queries.
© 2002-2024 Taperssection.com
Powered by SMF