Become a Site Supporter and Never see Ads again!

Author Topic: Upgrading The JB3 Harddrive..??  (Read 3008 times)

0 Members and 1 Guest are viewing this topic.

Offline Cactus

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 447
  • Gender: Male
  • Sittin @ 4-5 2 in a row...WOW!!!
Upgrading The JB3 Harddrive..??
« on: April 10, 2004, 02:29:32 PM »
hey now,  i saw an earlier post about this and was curious where people have taken it.. i was interested but not familiar with the software end of it.. ie how to transfer all the existing info over.. ive come across a few toshiba internal 4200 rpm 60gig for 125.00 ..seems like  great increase .. any input is much appreciated..
Cactus ... Cactus

Bring Back The Ugly Funk

Resident Married, Broke, And On Hiatus Taper

Offline Big Muff

  • Trade Count: (3)
  • Taperssection Member
  • ***
  • Posts: 626
  • Gender: Male
  • James Marshall Hendrix 1942 - 1970
Re:Upgrading The JB3 Harddrive..??
« Reply #1 on: April 12, 2004, 07:46:43 PM »
http://www.nomadness.net/modules.php?name=Sections&op=viewarticle&artid=23

This article will tell you what you need to know..

I just opened mine for the first time to have a look [I'm thinking about the upgrade myself]
my suggestion is to use either masking tape or perhaps super glue to hold the spacers in place when trying to get it back together.  Saves you a little headache.. I would use a small piece of tape for each spacer and just poke through with the screw when it's time to get it all back together...
 

BTW-  do you think steppin up to a higher rpm and buffer would be worth the extra dough. I figure a faster drive and larger buffer would reduce chance for recording errors??? but, i dunno...

Also checked on the JB3 drive, it is a Fujitsu model MHR2020AT
IDE
4200 rpm
2mb buffer

sounds kinda weak
Live rig: DPA 4021 > V3 > iHP-120

Vinyl rig: Music hall 5.1 w/acrylic platter > Ortofon Quintet Black > Pro-Ject Tube-Box II > V3 > UA-5

Offline nic

  • Big In Japan
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 4700
  • Gender: Male
    • half dead batteries
Re:Upgrading The JB3 Harddrive..??
« Reply #2 on: April 12, 2004, 07:56:03 PM »
remember, the faster RPM drive you use, the more battery draw. . .
« Last Edit: April 12, 2004, 07:56:23 PM by luvean »


the water's clean and innocent

Offline Big Muff

  • Trade Count: (3)
  • Taperssection Member
  • ***
  • Posts: 626
  • Gender: Male
  • James Marshall Hendrix 1942 - 1970
Re:Upgrading The JB3 Harddrive..??
« Reply #3 on: April 12, 2004, 08:05:50 PM »
Glad you pointed that out.. stick with the 4200 rpm drives then?

Curious about the buffer too....do you think it would be worth while to get one with maybe 8mb?

Thanks!

~Mike
Live rig: DPA 4021 > V3 > iHP-120

Vinyl rig: Music hall 5.1 w/acrylic platter > Ortofon Quintet Black > Pro-Ject Tube-Box II > V3 > UA-5

Offline nic

  • Big In Japan
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 4700
  • Gender: Male
    • half dead batteries
Re:Upgrading The JB3 Harddrive..??
« Reply #4 on: April 12, 2004, 08:12:08 PM »
dont think the buffer is going to make that much of a difference.
as an example, last weekend I ran 8 channel multitrack to a standard 2MB buffer 7,200 RPM IDE drive over firewire(which is slower than if the drive was locally enclosed on the IDE channel).
no flaws whatsoever with the disk writes.

the disk buffer is somewhat more of a marketing ploy. . .


the water's clean and innocent

Offline cachesoul

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 11
  • Gender: Male
  • I'm a llama!
Re:Upgrading The JB3 Harddrive..??
« Reply #5 on: April 30, 2004, 01:35:48 PM »
Greetings, this is my first post to the site.  lots of good information.

Getting ready to purchase a CJB3.  Is the 20 gig verison upgradeable like the 40 gig version; are there any differences in the models that I should be aware of?

Offline Brian Skalinder

  • Complaint Dept.
  • Trade Count: (28)
  • Needs to get out more...
  • *****
  • Posts: 18868
  • Gender: Male
Re:Upgrading The JB3 Harddrive..??
« Reply #6 on: April 30, 2004, 01:37:50 PM »
Is the 20 gig verison upgradeable like the 40 gig version; are there any differences in the models that I should be aware of?

Though I don't have first-hand experience, I believe both can be upgraded and the only difference between the 40GB and 20GB is a larger HD.
Milab VM-44 Links > Fostex FR-2LE or
Naiant IPA (tinybox format) >
Roland R-05

Offline zhianosatch

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 8992
  • Gender: Male
  • god-damned hippies!
Re:Upgrading The JB3 Harddrive..??
« Reply #7 on: May 01, 2004, 02:17:57 PM »
Is the 20 gig verison upgradeable like the 40 gig version; are there any differences in the models that I should be aware of?

Though I don't have first-hand experience, I believe both can be upgraded and the only difference between the 40GB and 20GB is a larger HD.

I never woulda guessed...

 

RSS | Mobile
Page created in 0.046 seconds with 32 queries.
© 2002-2024 Taperssection.com
Powered by SMF