Become a Site Supporter and Never see Ads again!

Author Topic: Speaker or DIY?  (Read 3094 times)

0 Members and 1 Guest are viewing this topic.

Offline heathen

  • (23)
  • Needs to get out more...
  • *****
  • Posts: 3281
Speaker or DIY?
« on: July 25, 2018, 12:26:27 PM »
I've got some new speakers on the way and they will require stands.  I don't have a ton of experience with bookshelf speakers, but these seem to me to be on the large side (20" high by 8"x14", 38 lbs.).  If anyone has any opinions about buying v. DIYing stands, or experience with making stands, I'd love to hear it.
Mics: AT4050ST | AT4031 | AT853 (C/SC) | Line Audio CM3 | Sennheiser e614 | Sennheiser MKE2 | DPA 4061 | CA-14 omni Pres: CA9200 | DPA d:vice Decks: Zoom F8 | Roland R-05

Offline goodcooker

  • (39)
  • Needs to get out more...
  • *****
  • Posts: 3618
  • Gender: Male
  • goes to 11
Re: Speaker or DIY?
« Reply #1 on: July 25, 2018, 02:47:41 PM »
One of my friends used these with the included carpet spikes for his mix monitors. They were probably not that heavy (38 lbs is pretty heavy for a bookshelf speaker - my AR M2s are close that size but only weigh maybe 20 lbs) but they were kinda tall and these got the tweeters up at ear level which is what he wanted. He had them filled with sand or something to give more mass IIRC.
MBHO KA300 || Joly Mod Oktava MK012 || NakCM300 || ADK A51 > Sound Devices 442 || Reference Audio Designs MS2 > Tascam DR701 || Marantz PMD620 || Tascam DR680
Transfers - Tascam DA30 or Fostex D5 (dats) or Nak MR2 (cassettes) > Sound Devices USB Pre

"Are you the Zman?" - fan at Panic 10-08-10 Kansas City
"I don't know who left this perfectly good inflatable wook doll here, but if I'm blowing her up, I'm keeping her." -  hoppedup


RSS | Mobile
Page created in 0.028 seconds with 26 queries.
© 2002-2021
Powered by SMF