Become a Site Supporter and Never see Ads again!

Author Topic: frequency response of high pass filter  (Read 1200 times)

0 Members and 1 Guest are viewing this topic.

Offline jerryfreak

  • No PZ
  • (31)
  • Needs to get out more...
  • *
  • Posts: 6206
  • The plural of anecdote is not data
frequency response of high pass filter
« on: August 14, 2019, 03:02:59 AM »
the DPA d:vice has an "80 Hz second order highpass filter", thats all the spec given, no slope

from what i gather, 80 Hz is where it should be 3 dB down. does "second order" tell us anything about the slope? trying to model with graphic EQ in soundforge to hear what it should sound like
currently "banned" for this "controversial" post
email me if you need to connect, as i am not allowed to send PM

-------------------------------------------------------------------------------------------------------
for sale (email in profile):
Mixpre6 v1 (NIB)
CA14 cards
(2) Manfrotto 099B mic poles
CMC-1K now orderable

Offline EmRR

  • (3)
  • Taperssection Member
  • ***
  • Posts: 644
    • ElectroMagnetic Radiation Recorders
Re: frequency response of high pass filter
« Reply #1 on: August 14, 2019, 07:01:22 AM »
2nd order tells us 12dB/oct
Mics: DPA 4060 w/MPS 6030 PSU/DAD6001/DAD4099, Neumann KM 131, KMR 81i, Oktava MK 012, Sennheiser MKH 105, MKH 20, MKH 30, MKH 40, MKH 800 TWIN, lots of other studio appropriate choices
Recorders: Zoom F8n, Sony MZ-R50, portable MOTU based multitrack DAW for client work

Offline jerryfreak

  • No PZ
  • (31)
  • Needs to get out more...
  • *
  • Posts: 6206
  • The plural of anecdote is not data
Re: frequency response of high pass filter
« Reply #2 on: August 15, 2019, 05:14:02 PM »
so -3dB at 80 Hz, -15 dB at 40 Hz, -28 dB at 20 Hz?
currently "banned" for this "controversial" post
email me if you need to connect, as i am not allowed to send PM

-------------------------------------------------------------------------------------------------------
for sale (email in profile):
Mixpre6 v1 (NIB)
CA14 cards
(2) Manfrotto 099B mic poles
CMC-1K now orderable

Offline EmRR

  • (3)
  • Taperssection Member
  • ***
  • Posts: 644
    • ElectroMagnetic Radiation Recorders
Re: frequency response of high pass filter
« Reply #3 on: August 15, 2019, 09:53:27 PM »
Roughly.  There are some other factors affecting initial slope that might render slight differences, but shouldn’t be much. 
Mics: DPA 4060 w/MPS 6030 PSU/DAD6001/DAD4099, Neumann KM 131, KMR 81i, Oktava MK 012, Sennheiser MKH 105, MKH 20, MKH 30, MKH 40, MKH 800 TWIN, lots of other studio appropriate choices
Recorders: Zoom F8n, Sony MZ-R50, portable MOTU based multitrack DAW for client work

 

RSS | Mobile
Page created in 0.032 seconds with 27 queries.
© 2002-2021 Taperssection.com
Powered by SMF