Become a Site Supporter and Never see Ads again!

Author Topic: ISO: DA-P1 wall wart  (Read 616 times)

0 Members and 1 Guest are viewing this topic.

Offline chun

  • (0)
  • Taperssection Member
  • ***
  • Posts: 503
  • Gender: Male
  • In search of the perfect mic placement
ISO: DA-P1 wall wart
« on: January 31, 2021, 11:50:21 AM »
Looking for a DA-P1 wall wart, would also consider chopped cable as well.

Thanks!
Neumann TLM 170s
Neumann TLM 103s

744t / Mix pre 6 / JB3 / d7 / d8

Offline jerryfreak

  • No PZ
  • (31)
  • Needs to get out more...
  • *
  • Posts: 6206
  • The plural of anecdote is not data
Re: ISO: DA-P1 wall wart
« Reply #1 on: January 31, 2021, 12:03:20 PM »
easy to build

any reference on specs of input jack?
currently "banned" for this "controversial" post
email me if you need to connect, as i am not allowed to send PM

-------------------------------------------------------------------------------------------------------
for sale (email in profile):
Mixpre6 v1 (NIB)
CA14 cards
(2) Manfrotto 099B mic poles

CMC-1K now orderable - 4-6 week leadtime

Offline Scooter123

  • "I am not an alcoholic. I am a drunk. Drunks don't go to meetings."
  • (9)
  • Needs to get out more...
  • *****
  • Posts: 2638
Re: ISO: DA-P1 wall wart
« Reply #2 on: January 31, 2021, 02:05:35 PM »
Looking for a DA-P1 wall wart, would also consider chopped cable as well.

Thanks!

You mean the AC Power supply?  Have you looked on eBay?  Most Tascam stuff is a standard diameter input, the large cylinder which I think is an "A" and either 7.5 or 12 volt input.  I did a quick and dirty search for "Power Supply 7.5 volts" and came up with quite a few under $15. 
« Last Edit: January 31, 2021, 02:33:49 PM by Scooter123 »
Regards,
Scooter123

mk41 > N Box  > Sony M-10
mk4 > N Box > Sony M-10

Offline ero3030

  • (59)
  • Taperssection All-Star
  • ****
  • Posts: 1586
  • Gender: Male
Re: ISO: DA-P1 wall wart
« Reply #3 on: February 01, 2021, 05:04:57 PM »
These have the goofy 3 pin plugs like the old Casio da2&7 so there is nothing off the shelf that can be used.  I'll dig around.  Like the Casio a lot of the OEM walwarts were bought to "hack" to make SLA battery packs.  Making them hard to find if at all new.  That was 90's stuff.   I'll look for ya, I may have one.  Ed
needin some fishhead music!

" known for f**king up a good weekend on a Thursday nite "

Offline chun

  • (0)
  • Taperssection Member
  • ***
  • Posts: 503
  • Gender: Male
  • In search of the perfect mic placement
Re: ISO: DA-P1 wall wart
« Reply #4 on: February 02, 2021, 11:29:41 PM »
Thanks Ed!
Neumann TLM 170s
Neumann TLM 103s

744t / Mix pre 6 / JB3 / d7 / d8

Offline jeenash

  • (4)
  • Taperssection Regular
  • **
  • Posts: 137
  • Gender: Male
Re: ISO: DA-P1 wall wart
« Reply #5 on: February 03, 2021, 06:26:20 AM »
I offered these cable ends up to another member but haven't heard back. 20$ for 1, 30$ for both, shipping included. They are factory molded ends that were used by ecocharge.

Offline ero3030

  • (59)
  • Taperssection All-Star
  • ****
  • Posts: 1586
  • Gender: Male
Re: ISO: DA-P1 wall wart
« Reply #6 on: February 03, 2021, 12:32:52 PM »
Bingo!!
needin some fishhead music!

" known for f**king up a good weekend on a Thursday nite "

 

RSS | Mobile
Page created in 0.039 seconds with 32 queries.
© 2002-2021 Taperssection.com
Powered by SMF