Gear / Technical Help > Microphones & Setup

Make my Schoeps actives XLR capable.

(1/3) > >>

voodoostrat:
Greetings,

I recently bought a pair of Beyers and needed a deck with XLR inputs, I opted to get a Zoom F6. This is my first XLR deck....so I’m thinking how can I get my Schoeps to work on this rig. For the last 7 years I’ve run nothing but Schoeps > Actives > TinyBox > M10. I’m thinking my life would be simpler if I could just use the Zoom for the 2 sets of Mics and still have 2 CHs left for a SBD feed. I’ve spent the last week or so trying to figure it...have Nick make a cable and a Naiant PFA or IPF (sounds like beers) ect ect. Tried to look on Jon’s site and it seems like he’s shut it down. Any help on this would be appreciated.

Maybe just get Schoeps bodies?

Thanks,

Strat

darby:
https://naiant.com/pfa-specification/
I have heard you can still email Jon with your request
and then have the PFAs drop shipped to Nick

if you want bodies... look at the cmc1s

DavidPuddy:
You should just be able to run the tinybox into the recorder (no 48v) with a 3.5mm to dual XLR cable. This is how I run my babynbox with mixpre 6, except with a mini XLR on the nbox side.

I only use my PFAs as backup as I have had one go out before

BradleyJY15:
I just ordered some PFAs today from Jon to send Nick to make some active cables...You will just need to email him as was previously stated...

voodoostrat:

--- Quote from: darby on June 04, 2021, 03:37:20 PM ---https://naiant.com/pfa-specification/
I have heard you can still email Jon with your request
and then have the PFAs drop shipped to Nick

if you want bodies... look at the cmc1s

--- End quote ---

Thanks, Darby.

I reached out to Jon to get the specifics.

Boy those CMC1's look killer, gotta start saving.

Navigation

[0] Message Index

[#] Next page