Become a Site Supporter and Never see Ads again!

Author Topic: Now this is a listening/mixing room!  (Read 5419 times)

0 Members and 1 Guest are viewing this topic.

RebelRebel

  • Guest
  • Trade Count: (0)
Now this is a listening/mixing room!
« on: July 22, 2006, 12:45:11 PM »
In case anyone hasnt seen this...man, this looks fantastic...



he wall diffusors are basically a primitive root diffusor, folded into 2D. there are 138646 "tines" distributed around the room, no two the same length.

they are fabricated from 4' x 8' x 1" MDF on a Cosmac horizontal mill. 1532 boards were cut from 1532 individual NC programs. it took 3-1/2 45' semi's to deliver over 90 tons of raw MDF. after fabrication there's more then 40 tons of MDF on the walls.

the ceiling is also a PRD, some 7' high, faced with RPG Skylines.

the big monitors are ATC150's. the mid-fields are Genelec 8050's. the subs are 2 x Genelec 7070. there are many, many choices of near-fields.

the ambience starts at about 30dB down from the direct sound. the RT60 is about 1/4 second, and sounds somewhat consistent above 250Hz and 4kHz.




Offline rokpunk

  • WOULD HIT IT
  • Trade Count: (4)
  • Needs to get out more...
  • *****
  • Posts: 9262
  • Gender: Male
Re: Now this is a listening/mixing room!
« Reply #1 on: July 24, 2006, 06:55:51 PM »
the chair is herman miller
The new and improved taperssection.com....now with freedom of speech without the repercussion of -T's!



again, your showing your cluelessness.


Jah sitteth in Mount Zion
And rules all creation........

Offline momule

  • Trade Count: (4)
  • Needs to get out more...
  • *****
  • Posts: 2178
  • Gender: Male
Re: Now this is a listening/mixing room!
« Reply #2 on: July 26, 2006, 09:29:43 AM »
I'm sitting in the black version right now.  One of the best chairs made hands down.
AKG 463's (uno ck62) > Mackie Onyx Satellite > Microtrack II

Offline cheshirecat

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1210
  • Gender: Male
Re: Now this is a listening/mixing room!
« Reply #3 on: July 26, 2006, 01:57:23 PM »
As am I... Though I used to have the high backed version which was a little nicer.  :-\
SB2 / Rega P1 > Modified Dynaco PAS2 > Modified Dynaco MK-IV monoblocks> Axiom M22 v2

Offline scervin

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1739
  • Gender: Male
Re: Now this is a listening/mixing room!
« Reply #4 on: July 28, 2006, 07:25:27 AM »
way too much work for that room and I find it really had to believe there is not once piece the same size as another.

We have those chairs as well, but I hate how they wear out your pocket if you keep your wallet on you.

Offline rokpunk

  • WOULD HIT IT
  • Trade Count: (4)
  • Needs to get out more...
  • *****
  • Posts: 9262
  • Gender: Male
Re: Now this is a listening/mixing room!
« Reply #5 on: July 28, 2006, 08:02:40 AM »
way too much work for that room and I find it really had to believe there is not once piece the same size as another.

We have those chairs as well, but I hate how they wear out your pocket if you keep your wallet on you.

Wallets in the back pocket cause back problems. I keep mine in my front pocket these days.
The new and improved taperssection.com....now with freedom of speech without the repercussion of -T's!



again, your showing your cluelessness.


Jah sitteth in Mount Zion
And rules all creation........

Offline rokpunk

  • WOULD HIT IT
  • Trade Count: (4)
  • Needs to get out more...
  • *****
  • Posts: 9262
  • Gender: Male
Re: Now this is a listening/mixing room!
« Reply #6 on: July 28, 2006, 11:25:37 AM »
What am I missing here...how could it take 3 1/2 semis to move the amount of wood shown in that picture?
The new and improved taperssection.com....now with freedom of speech without the repercussion of -T's!



again, your showing your cluelessness.


Jah sitteth in Mount Zion
And rules all creation........

Offline macroint

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 4373
  • Gender: Male
    • Jeff's List
Re: Now this is a listening/mixing room!
« Reply #7 on: July 28, 2006, 11:28:10 AM »
You'd really feel like a dick if, after all that work, it still didn't sound right...


Peluso CEMC6>PS-2>AD-20>NJB3


SUPPORT LOCAL MUSIC
http://baltimore-taper.blogspot.com

Offline eric.B

  • to the side qualified
  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 2796
Re: Now this is a listening/mixing room!
« Reply #8 on: July 28, 2006, 12:07:35 PM »
I would think that after all that ca$h and time, your brain would override/rationalize any thoughts of..  "hmm  does it sound ok?"
We have a system that increasingly taxes work and subsidizes nonwork.  ~Milton Friedman

cshepherd

  • Guest
  • Trade Count: (0)
Re: Now this is a listening/mixing room!
« Reply #9 on: July 28, 2006, 12:27:53 PM »
And to top it off, it's wired with Canare star-quad.   :P

Chris

RebelRebel

  • Guest
  • Trade Count: (0)
Re: Now this is a listening/mixing room!
« Reply #10 on: July 28, 2006, 02:31:38 PM »
And to top it off, it's wired with Canare star-quad.   :P

Chris

Yeah, but he has  The RevelationAC cord , uses The Clever Little Clock as well as Audiophile Outlet covers..this of course mitigates any bad effects caused by using star quad wire.  :P

Offline Mojowill

  • Educated, no. Stupid, yup.
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 12916
  • Gender: Male
  • YOGIS R.I.P.
    • Mojowill's Music List
Re: Now this is a listening/mixing room!
« Reply #11 on: July 28, 2006, 05:32:53 PM »
What am I missing here...how could it take 3 1/2 semis to move the amount of wood shown in that picture?

cause each one was cut from an individual virgin growth rainforest tree.  also the stuffing in the chair is a secret blend of spotted owl chick down and wolf pup muzzle fur.  It is covered with baby seal skin.

Wheres the beer fridge and cup holder.  and no listening room would be complete without a pinup of some hottie and some random cycle parts lyin around.
I'm a mean machine drinkin gasoline and honey you can make my motor hum.

cshepherd

  • Guest
  • Trade Count: (0)
Re: Now this is a listening/mixing room!
« Reply #12 on: July 28, 2006, 07:37:21 PM »
And to top it off, it's wired with Canare star-quad.   :P

Chris

Yeah, but he has  The RevelationAC cord , uses The Clever Little Clock as well as Audiophile Outlet covers..this of course mitigates any bad effects caused by using star quad wire.  :P


The Clever Little Clock...it's an EMI/RFI stabilizer.  It likely works off of an electomagnetic field or possibly some sort of infrared device.  It's about controlling the flow of Electrons, which will improve both audio and video signals.  The clock has absolutely nothing to do with the product, other than providing a cheap box to put the transmitter in.  We use Quantum Resonance Technology products to control EMI/RFI in our systems.  You plug the Symphony Pro in and turn it on...that's it.  I've had friends in the Pro Audio business take the it apart and tell me the product is a complete scam...only to eat those words after a quick demonstration at my house. 

The Audiophile Outlet is also for real.  EMI shielding and Resonance control are serious issues to consider with a/c.  I just replaced a skanky wall outlet with an FIM High Performance wall outlet.  I'm also going to install one of FIM's outlet covers as well.  You'll be buying a set before you know it, Teddy.

Chris
Snake Oil Expert  ;D

Offline rokpunk

  • WOULD HIT IT
  • Trade Count: (4)
  • Needs to get out more...
  • *****
  • Posts: 9262
  • Gender: Male
Re: Now this is a listening/mixing room!
« Reply #13 on: July 28, 2006, 08:38:18 PM »
a much better use of wood :








/team motorcycle approves
The new and improved taperssection.com....now with freedom of speech without the repercussion of -T's!



again, your showing your cluelessness.


Jah sitteth in Mount Zion
And rules all creation........

BobW

  • Guest
  • Trade Count: (0)
Re: Now this is a listening/mixing room!
« Reply #14 on: July 29, 2006, 12:43:42 PM »
I'm sitting in the black version right now.  One of the best chairs made hands down.

I just bought a true-black Aeron
Best investment that I've made in my behind since the elliptical machine.    ;D


All the wooden Bike needs is wings and the Wright Brother's ghost would come visiting.
I'll bet the wood takes the vibration right out of the V-Twin
« Last Edit: July 29, 2006, 12:47:39 PM by _Bob_ »

 

RSS | Mobile
Page created in 0.086 seconds with 39 queries.
© 2002-2024 Taperssection.com
Powered by SMF