Become a Site Supporter and Never see Ads again!

Author Topic: DIN Stereo Technique  (Read 7516 times)

0 Members and 1 Guest are viewing this topic.

Offline Bri

  • Complaint Dept.
  • (0)
  • Needs to get out more...
  • *****
  • Posts: 3235
  • Gender: Male
  • There is nothing you can hold, for very long.
DIN Stereo Technique
« on: December 20, 2002, 12:33:30 AM »
From the DPA University site...

DIN stereo

Two first order cardioid microphones spaced 20 cm and angled 90° creating the stereo image.

DIN stereo uses two cardioid microphones spaced 20 cm apart and angled at 90° to create a stereo image. The DIN stereo produces a blend of intensity stereo signals and time delay stereo signals, due to the off-axis attenuation of the cardioid microphones together with the 20 cm spacing. If used at larger distances to the sound source the DIN stereo technique will loose the low frequencies due to the use of pressure gradient microphones and the influence of the proximity on these type of microphones. The DIN stereo technique is more useful at shorter distances, for example on piano, small ensembles or used for creating stereo on a instrument section in a classical orchestra.

« Last Edit: February 18, 2005, 12:17:54 PM by Brian Skalinder »


RSS | Mobile
Page created in 0.022 seconds with 26 queries.
© 2002-2021
Powered by SMF