Taperssection.com

Gear / Technical Help => Remote Power => Topic started by: marc0789 on January 27, 2004, 11:36:27 AM

Title: are 4022's hot enough to use Stewart or other phantom?
Post by: marc0789 on January 27, 2004, 11:36:27 AM
ssia. Wondering if a pair of stewarts or other phantom only will give the 4022's enough juice to run 4022>phantom>m1, with decent levels line in to the m1....or do I need something like a Zefiro? Looking to pick up something cheap for the few true stealth I do, like Dylan. Thanks, Marc.
Title: Re:are 4022's hot enough to use Stewart or other phantom?
Post by: Brian Skalinder on January 27, 2004, 11:44:40 AM
Dunno, but you can always toss in a couple line transformers for ~20dB gain if you think you're gonna be too low.  Small, inexpensive, clean.  Great option, IMO.
Title: Re:are 4022's hot enough to use Stewart or other phantom?
Post by: marc0789 on January 27, 2004, 02:09:53 PM
that's what I thought. Honestly, a used mp-2 probably wouldn't run that much more than phantom and transformers, and would be cleaner most likely,,,,and not much bigger if at all. Thanks, Marc.
Title: Re:are 4022's hot enough to use Stewart or other phantom?
Post by: nickgregory on January 27, 2004, 02:48:16 PM
I actually like the 4022 MP-2 tapes I have heard that Scott has done...of course I am one of those guys who actually likes the sound of the MP-2, so take that for what it is worth.
Title: Re:are 4022's hot enough to use Stewart or other phantom?
Post by: Sean Gallemore on January 28, 2004, 04:48:26 AM
and there is PLENTY of gain on an mp-2 to go around
Title: Re:are 4022's hot enough to use Stewart or other phantom?
Post by: Lee on February 01, 2004, 10:16:12 PM
sounds like you need to find another PSP-2...
Title: Re:are 4022's hot enough to use Stewart or other phantom?
Post by: Cooker on February 24, 2004, 03:05:36 PM
a cheap option would be a Beyer MV-100 - can be had for $175 - $200 - has 20/40/60 dB, runs off 2x 9V batts for 8-9 hours, and is housed in the same plastic casing as the sax.