Become a Site Supporter and Never see Ads again!

Author Topic: Schoeps CMR Rig - Tinybox/MK4/CMR- Sarah Mclachlan Samples from 3/12/2011  (Read 71146 times)

0 Members and 1 Guest are viewing this topic.

Offline spyder9

  • Trade Count: (82)
  • Needs to get out more...
  • *****
  • Posts: 13196
  • Gender: Male
  • "Are you Zman?"
    • My Archived shows
Man, this sounds awesome for such a tiny rig.  How much do a set of CMR cables go for?  Where can I get them?

Offline darktrain

  • Trade Count: (715)
  • Needs to get out more...
  • *****
  • Posts: 2875
  • Gender: Male
  • Whats next?
Man, this sounds awesome for such a tiny rig.  How much do a set of CMR cables go for?  Where can I get them?
The CMR's will run 950-1000 for a set depending on the length you get, add 180 for the Tinybox and of course caps, but it is a dam fine and very small rig

Offline nottingham

  • Trade Count: (18)
  • Taperssection Member
  • ***
  • Posts: 371
  • There's wisemen hiding in the mountains
It took along time for this system to catch on. Jump on the bus Dan and have some kool aid. ;D
Schoeps MK4-MK41>cmc6/Nbob actives/Naiant LB/Naiant TB > Sony M10/PMD620

Offline Big Perm

  • Trade Count: (67)
  • Taperssection All-Star
  • ****
  • Posts: 1198
  • Gender: Male
  • Rage, Rest, work a lot, Repeat
i took a sip of kool aid
i ordered my own koolaid.....it will never come...anyone every had a hard time getting a hold of Jerry at Posthorn.  I have ordered tons of stuff from him in the past. he is not returning my emails or calls for the past 3 or 4 days.  I know CMR's are in the country, because edtyre got his and i ordered mine before him.  get VERY frustrated!
a
Mics: Schoeps mk4v| mk41v | mk22 | mk8 & mk5 (m/s)
         Schoeps m222> nt222dc (x2)
         Schoeps cmc 1k (x2)
         Schoeps vst62iu (x2)
         Schoeps KCY 250/5 IG (x2) Schoeps KC 5g (x2)
         DPA 4015c
Pre’s: Sonosax SX-M2D2
         Aeta PSP-3
         E.A.A. PSP-2
Recorder: Sonosax sx-r4+, SD702, Sony m10

Offline dactylus

  • Site Supporter
  • Trade Count: (62)
  • Needs to get out more...
  • *
  • Posts: 5992
  • Gender: Male
  • Maplewood, MN
i took a sip of kool aid
i ordered my own koolaid.....it will never come...anyone every had a hard time getting a hold of Jerry at Posthorn.  I have ordered tons of stuff from him in the past. he is not returning my emails or calls for the past 3 or 4 days.  I know CMR's are in the country, because edtyre got his and i ordered mine before him.  get VERY frustrated!
a

^

Maybe he's on vacation.   ;)

What is the price on a pair of the cmr's from Posthorn?  My Milab actives sound great and I'm still hoping for the Gefell Nbox to materialize, but you never know...



« Last Edit: July 11, 2010, 10:28:20 AM by dactylus »
hot licks > microphones > recorder



...ball of confusion, that's what the world is today, hey hey...

Offline Big Perm

  • Trade Count: (67)
  • Taperssection All-Star
  • ****
  • Posts: 1198
  • Gender: Male
  • Rage, Rest, work a lot, Repeat


Maybe he's on vacation.   ;)

What is the price on a pair of the cmr's from Posthorn?  My Milab actives sound great and I'm still hoping for the Gefell Nbox to materialize, but you never know...
[/quote]

around a grand, depends on how long you get them
a
Mics: Schoeps mk4v| mk41v | mk22 | mk8 & mk5 (m/s)
         Schoeps m222> nt222dc (x2)
         Schoeps cmc 1k (x2)
         Schoeps vst62iu (x2)
         Schoeps KCY 250/5 IG (x2) Schoeps KC 5g (x2)
         DPA 4015c
Pre’s: Sonosax SX-M2D2
         Aeta PSP-3
         E.A.A. PSP-2
Recorder: Sonosax sx-r4+, SD702, Sony m10

Offline darktrain

  • Trade Count: (715)
  • Needs to get out more...
  • *****
  • Posts: 2875
  • Gender: Male
  • Whats next?
Re: NEW Schoeps CMR Rig - Tinybox is IN Hand - First show up on LMA now
« Reply #171 on: July 11, 2010, 02:44:28 PM »
ok, ran the maiden Tinybox show last night for Ween(big thanks to Kobi(liveween) for the hookup), not going to be the greatest recording due to the fact that its the Aragon and we were pretty much forced to run FOB, but none the less you have to start somewhere and there were 4 other setups ran so hopefully those get upped so we can see some comps. also just a couple rig pics for fun.

http://www.archive.org/details/ween2010-06-25.mk41.flac&reCache=1

Kobi's Earthworks and Berliners and my MK41/CMR's


Kobi and My bags





Darktrain, what is that yellow box? I suppose it is for protecting the mic's. Can you tell me the brand?

Sorry, just noticed this question, its a small pelican(1020), i use it to store the cmr cables/caps

Online tim in jersey

  • Site Supporter
  • Trade Count: (8)
  • Needs to get out more...
  • *
  • Posts: 3791
  • Gender: Male
Is the cable on the CMRs the same diameter and stiffness as the KC5 cable?
its more akin to the ccm cable

Thanks for the replies, fellas.

What's the outer jacket like on the CMR's? Is it as stiff as the KC5s, or are they more flexible?

Offline darktrain

  • Trade Count: (715)
  • Needs to get out more...
  • *****
  • Posts: 2875
  • Gender: Male
  • Whats next?
Is the cable on the CMRs the same diameter and stiffness as the KC5 cable?
its more akin to the ccm cable

Thanks for the replies, fellas.

What's the outer jacket like on the CMR's? Is it as stiff as the KC5s, or are they more flexible?

Its pretty flexible and a little stiff, it is kevlar reinforced

Offline darktrain

  • Trade Count: (715)
  • Needs to get out more...
  • *****
  • Posts: 2875
  • Gender: Male
  • Whats next?
Just upped the Big Bad Voodoo Daddy set on Dime if your interested in giving it a listen proper like ;D


http://www.dimeadozen.org/torrents-details.php?id=312511

Offline NOLAfishwater

  • is not taping much these days
  • Trade Count: (72)
  • Needs to get out more...
  • *****
  • Posts: 6344
  • Gender: Male
  • I LIKE FISHIN
order your CMR's from Professional Sound Services out of NYC. ask for Justin Marinoff (he is a taper and the sales MGR) 2312-586-1033

Offline colargol

  • Trade Count: (10)
  • Taperssection Regular
  • **
  • Posts: 176
Very eager to hear some comparison between this setup and the nbox... I have trouble doing a comp, since I only do stealth...
-c

Just got my CMR's today! I want to wire them up with 5 pin mini xlr connector to run with Niant's Tinybox
MK4s/MK41s > nbob actives > tinybox/babynbox > M10/A10

Offline darktrain

  • Trade Count: (715)
  • Needs to get out more...
  • *****
  • Posts: 2875
  • Gender: Male
  • Whats next?
Here is a Rockin Heart sample and a quieter sample from Sarah Mclachlan from last night and shows how nice and versatile that Tinybox and CMR combo can be, I think it turned out very nice for a venue that is challenging to get a nice pull from, I was at First Midwest Bank Amphitheatre in Tinley Park, I was dead center 25 rows back, I was using the MK41's/CMR's> Naiant Tinybox> M10
« Last Edit: July 18, 2010, 10:29:51 PM by Darktrain »

adrianf74

  • Guest
  • Trade Count: (0)
Here is a Rockin Heart sample and a quieter sample from Sarah Mclachlan from last night and shows how nice and versatile that Tinybox and CMR combo can be, I think it turned out very nice for a venue that is challenging to get a nice pull from, I was at First Midwest Bank Amphitheatre in Tinley Park, I was dead center 25 rows back, I was using the MK41's/CMR's> Naiant Tinybox> M10
Very nice pull for the combo.  The few times I've tried to tape Sarah, I've been burned by the crowd.

Online tim in jersey

  • Site Supporter
  • Trade Count: (8)
  • Needs to get out more...
  • *
  • Posts: 3791
  • Gender: Male
Thinking about pulling the trigger on a CMR>tinybox setup over the N-Box.

A few questions:

How long does the tinybox run the CMR's?

How are y'all wiring the CMR>Switchcraft Tini-Q, using 4 or 5 pin connector?

I'm thinking of dumping the open rig (mkXX>KC5>CMC6>xlr>pre>recorder, or mkXX>cmc6>xlr>pre>recorder). I'm thinking a 5' or so CMR will do the trick for self-worn. But, when running 'open' I sometimes need a big homerun. IE: clamping to center balconies/loges when my seat(s) are way off center. Is there a practical length as to an extender cable I can make?

 

RSS | Mobile
Page created in 0.101 seconds with 44 queries.
© 2002-2024 Taperssection.com
Powered by SMF