Become a Site Supporter and Never see Ads again!

Author Topic: Marantz 671 in the field... Part 2  (Read 84792 times)

0 Members and 1 Guest are viewing this topic.

Offline heikki

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 880
  • Gender: Male
  • ...and i'm as honest as a jersey man can be
    • OutDated List
Re: Marantz 671 in the field... Part 2
« Reply #120 on: March 13, 2006, 08:31:01 PM »

What did you tape Heikki ?


Scarecrow Collection. 

I missed these guys in Stillwater but since they were playing at Triumph in New Hope,  the IPA there is decent, I was in Lambertville for dinner, and above all I was ITCHING to run the 671 I figured I would check them out.  Not really my thing...  I sent a copy to their manager this morning, he seemed quite keen on getting the show up on archive.  Actually sounds decent since most uninterested chatters (including some people we know ;-) in that place are behind your rig sitting at the bar.

Are you doing Fri & Sat this weekend?  OK, enough thread hijack.

C 480 B + CK61/63
          Edirol R-4 (Oade T-Mod x 4)

Masters on LMA: http://www.archive.org/bookmarks/heikki

Offline sygdwm

  • unknown sleath taper
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 8747
  • Gender: Male
Re: Marantz 671 in the field... Part 2
« Reply #121 on: March 13, 2006, 09:39:59 PM »
I've stayed away from transfering from the recorder directly after hearing someone had problems doing it that way.
It looks like I'm going to have to do some tests...

fwiw, i have had one problem. i changed the name of the folder "MPGLANG1" to another name before i transfered it, and it did not like that. so, i dont change the name until after it's been transferred. lesson learned. i , recently, transferred a 2.5gb file in about 10 minutes via usb1.1.
mics: (4)akg c460b(a60,mk46,ck1x,ck1,ck2,ck3,ck61,ck63)
pres: oade m148/edirol wmod ua5
recorders: marantz stock671/oade acm671/fostex busman vintage fr2le

(P.S.: On a threaded discussion board like this one, there's no need to repeat someone's post when you reply to them; everyone can see all the messages in the thread.)

Offline leehookem

  • Trade Count: (3)
  • Needs to get out more...
  • *****
  • Posts: 4439
  • Gender: Male
    • Texas Tapers
Re: Marantz 671 in the field... Part 2
« Reply #122 on: March 13, 2006, 09:57:16 PM »
I just bought a Maha 801 charger for 70.00. It's supposed to charge 8aa's in an hour. We'll see how it goes.

I have that as well.  It kicks much ass.  Do the soft charge though (2 hours).  It helps the life of your batteries.
www.texastapers.org


AKG c480b ck61/ck63 > Tascam DR-70D
Oade ACM Marantz PMD-671
AKG ck61/63 > NBob Actives > Naiant PFA > Tascam DR-70D
Oade ACM Marantz PMD-671
Audiophile 2496 > Mytek Stereo96 DAC > Sony MDR-7506
Dual 1229 > Marantz 2270 > Kimber Kables > Cerwin Vega VS120

Canon Rebel XSi, EF 50 mm f/1.8, EF-S 18-55mm f/3.5-5.6 IS

Offline esteyes

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 217
  • Gender: Male
Re: Marantz 671 in the field... Part 2
« Reply #123 on: March 14, 2006, 12:04:48 AM »
just a quicky. i am running the sony dmx-p01 > stock 671 and i have found the combo that works for me. am still trying to clip the inputs.. it is so nice to have everything you need to adjust staring you in the face. one day i'll have to hook up with one of the v3 boys and run a comparison, but after rxr, cassette, beta-pcm, then dat, i think i am in love. did kim wilson in savoy brown v2 at the coach house and was very happy with my tape altho the sbd came out better due to FOH's attention to the mix he was sending. THANK YOU bro. i think i would be very interested in some sort of shoot out - maybe over the spring/summer some of us left coasters can get together at a show and play...

best to you all
nism
Neil Sturtevant
San Marcos, CA
AKG 451's + CK1/CK8/CK9
AKG 460's + CK61/CK63 or A60M + CK1/CK8/CK9  or MK46/CK1X/CK8X
Sennheiser K3U + MKE-2, ME20, ME40, ME80, ME88
Sennheiser MKH 110/2 x2 + MKH 110/1 powered via custom battbox
Busman BSC1-K1/K2/K3/K4
Shure FP33 or Sony DMX P01
Korg MR1000 or Sony M1
stealth: M1 > MKE-2/ME 20/ME40 in the hat
all cabling LINK (made in Germany) balanced or balanced miniature w/ Neutrik ends

making custom cables and serviceable (non-epoxy) ultraflush right angle cables plus other custom projects

Offline silentmark

  • Shine with or without cherries ?
  • Trade Count: (5)
  • Needs to get out more...
  • *****
  • Posts: 2685
  • Gender: Male
  • Boat, cucumber, wire ...
Re: Marantz 671 in the field... Part 2
« Reply #124 on: March 14, 2006, 07:15:57 AM »

What did you tape Heikki ?


Scarecrow Collection. 

I missed these guys in Stillwater but since they were playing at Triumph in New Hope,  the IPA there is decent, I was in Lambertville for dinner, and above all I was ITCHING to run the 671 I figured I would check them out.  Not really my thing...  I sent a copy to their manager this morning, he seemed quite keen on getting the show up on archive.  Actually sounds decent since most uninterested chatters (including some people we know ;-) in that place are behind your rig sitting at the bar.

Are you doing Fri & Sat this weekend?  OK, enough thread hijack.



Just doing Friday, buzz me if you are going ...
Dissent is the highest form of patriotism. - Howard Zinn, not Thomas Jefferson ...

Mics: Neumann AK50/AK40/AK30/AK20(1 for M/S), AKG568eb's (gathering dust)
Decks: R-44 (OCM), Fostex FR2LE (OWM), Microtacker (semi-retired), D8 (retired), D7 (retired)
Pre-amps: Apogee Minime (semi-retired), Sonosax SX-M2 (semi-retired), Oade mod SBM-1 (retired)
Cables: LC3 actives (older lemo style x2), Audio Magic Hyper Conductor interconnects

http://www.youtube.com/watch?v=J3qrWOOposQ

Offline Kevin Straker

  • The Shogun of Easley
  • Trade Count: (4)
  • Needs to get out more...
  • *****
  • Posts: 2310
  • Gender: Male
Re: Marantz 671 in the field... Part 2
« Reply #125 on: March 14, 2006, 08:40:10 AM »
I've stayed away from transfering from the recorder directly after hearing someone had problems doing it that way.
It looks like I'm going to have to do some tests...

Mine's been flawless so far. It seems to do 1.8 gb in about 14 minutes.
People on ludes should not drive...
J. Spicoli

mk4,mk21>kc5>cmc6>V3>SD722

Offline esteyes

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 217
  • Gender: Male
Re: Marantz 671 in the field... Part 2
« Reply #126 on: March 14, 2006, 10:04:25 AM »
my deck transfers 4G in under 4 minutes via USB 2.0. i have still to send mine in for the file software upograde.

nism
Neil Sturtevant
San Marcos, CA
AKG 451's + CK1/CK8/CK9
AKG 460's + CK61/CK63 or A60M + CK1/CK8/CK9  or MK46/CK1X/CK8X
Sennheiser K3U + MKE-2, ME20, ME40, ME80, ME88
Sennheiser MKH 110/2 x2 + MKH 110/1 powered via custom battbox
Busman BSC1-K1/K2/K3/K4
Shure FP33 or Sony DMX P01
Korg MR1000 or Sony M1
stealth: M1 > MKE-2/ME 20/ME40 in the hat
all cabling LINK (made in Germany) balanced or balanced miniature w/ Neutrik ends

making custom cables and serviceable (non-epoxy) ultraflush right angle cables plus other custom projects

Offline Kevin Straker

  • The Shogun of Easley
  • Trade Count: (4)
  • Needs to get out more...
  • *****
  • Posts: 2310
  • Gender: Male
Re: Marantz 671 in the field... Part 2
« Reply #127 on: March 17, 2006, 11:03:00 AM »
Well, last night was the first time running my 671 off of aa's. I am using these:http://www.jr.com/JRProductPage.process?Product=4035099


50 minutes in to the first set I saw the low power indicator blinking. I gave the deck a reach around and kind of squeezed the lid to the battery compartment. Voila! The battery meter is full again. As long as I held my mouth right, the meter stayed full all night. I had to squeeze the thing a couple more times to keep the problem for coming back. What are we doing about this? What kind of lion external can I use? I think I'd refer to go external if this is going to be flakey.
People on ludes should not drive...
J. Spicoli

mk4,mk21>kc5>cmc6>V3>SD722

Offline sygdwm

  • unknown sleath taper
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 8747
  • Gender: Male
Re: Marantz 671 in the field... Part 2
« Reply #128 on: March 17, 2006, 06:08:48 PM »
maybe i am lucky, but i have NOT had a single issue w/ 2500mah powerex li-on's, except when i forgot to charge them.
mics: (4)akg c460b(a60,mk46,ck1x,ck1,ck2,ck3,ck61,ck63)
pres: oade m148/edirol wmod ua5
recorders: marantz stock671/oade acm671/fostex busman vintage fr2le

(P.S.: On a threaded discussion board like this one, there's no need to repeat someone's post when you reply to them; everyone can see all the messages in the thread.)

Offline esteyes

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 217
  • Gender: Male
Re: Marantz 671 in the field... Part 2
« Reply #129 on: March 17, 2006, 09:40:59 PM »
Quote
I gave the deck a reach around and kind of squeezed the lid to the battery compartment.

exactly what i did but i get the reverse effect - deck dies...  discussed much earlier in this thread

nism
Neil Sturtevant
San Marcos, CA
AKG 451's + CK1/CK8/CK9
AKG 460's + CK61/CK63 or A60M + CK1/CK8/CK9  or MK46/CK1X/CK8X
Sennheiser K3U + MKE-2, ME20, ME40, ME80, ME88
Sennheiser MKH 110/2 x2 + MKH 110/1 powered via custom battbox
Busman BSC1-K1/K2/K3/K4
Shure FP33 or Sony DMX P01
Korg MR1000 or Sony M1
stealth: M1 > MKE-2/ME 20/ME40 in the hat
all cabling LINK (made in Germany) balanced or balanced miniature w/ Neutrik ends

making custom cables and serviceable (non-epoxy) ultraflush right angle cables plus other custom projects

Offline leehookem

  • Trade Count: (3)
  • Needs to get out more...
  • *****
  • Posts: 4439
  • Gender: Male
    • Texas Tapers
Re: Marantz 671 in the field... Part 2
« Reply #130 on: March 18, 2006, 09:11:21 PM »
my 671 was scheduled for a Tuesday (21st) arrival.  It's sitting in my apartment office under lock and key.  can't get it until Monday morning.

Grrrrr...

:)
www.texastapers.org


AKG c480b ck61/ck63 > Tascam DR-70D
Oade ACM Marantz PMD-671
AKG ck61/63 > NBob Actives > Naiant PFA > Tascam DR-70D
Oade ACM Marantz PMD-671
Audiophile 2496 > Mytek Stereo96 DAC > Sony MDR-7506
Dual 1229 > Marantz 2270 > Kimber Kables > Cerwin Vega VS120

Canon Rebel XSi, EF 50 mm f/1.8, EF-S 18-55mm f/3.5-5.6 IS

Offline Since85

  • Trade Count: (12)
  • Taperssection Regular
  • **
  • Posts: 242
  • Gender: Male
Re: Marantz 671 in the field... Part 2
« Reply #131 on: March 19, 2006, 12:21:40 PM »
Powering question.....

So the 671 manual says that the power consumption is about 6w on average. So, does that mean it pulls .5a? (6 w/12 v = .5a)? Is this correct? Does that mean a 7 mah lead acid battery (powersonic) should run the thing about 14 hours via the external power input (but using DC)? What run times are people getting with 8 aa alkaline and 8 aa 2500 mah nimh batteries with the Oade ACM and phantom powering on? Any insight most appreciated, thanks!!

Damn... Wish I had one of these damn decks for Jerry  :-[


Offline Kevin Straker

  • The Shogun of Easley
  • Trade Count: (4)
  • Needs to get out more...
  • *****
  • Posts: 2310
  • Gender: Male
Re: Marantz 671 in the field... Part 2
« Reply #132 on: March 20, 2006, 09:19:23 AM »
Well, last night was the first time running my 671 off of aa's. I am using these:http://www.jr.com/JRProductPage.process?Product=4035099


50 minutes in to the first set I saw the low power indicator blinking. I gave the deck a reach around and kind of squeezed the lid to the battery compartment. Voila! The battery meter is full again. As long as I held my mouth right, the meter stayed full all night. I had to squeeze the thing a couple more times to keep the problem for coming back. What are we doing about this? What kind of lion external can I use? I think I'd refer to go external if this is going to be flakey.

...and when I squeezed it, it put a VERY audible thump on the tape.

I just bought one of these. We'll see how it goes.

http://www.hoyttech.com/index.cfm?fuseaction=product.display&Product_ID=306
« Last Edit: March 20, 2006, 04:49:00 PM by Kevin Straker »
People on ludes should not drive...
J. Spicoli

mk4,mk21>kc5>cmc6>V3>SD722

Offline leehookem

  • Trade Count: (3)
  • Needs to get out more...
  • *****
  • Posts: 4439
  • Gender: Male
    • Texas Tapers
Re: Marantz 671 in the field... Part 2
« Reply #133 on: March 21, 2006, 11:59:40 AM »
finally, the wait is over.  This thing is a breeze to operate!  I can't wait till tonight to tape.
www.texastapers.org


AKG c480b ck61/ck63 > Tascam DR-70D
Oade ACM Marantz PMD-671
AKG ck61/63 > NBob Actives > Naiant PFA > Tascam DR-70D
Oade ACM Marantz PMD-671
Audiophile 2496 > Mytek Stereo96 DAC > Sony MDR-7506
Dual 1229 > Marantz 2270 > Kimber Kables > Cerwin Vega VS120

Canon Rebel XSi, EF 50 mm f/1.8, EF-S 18-55mm f/3.5-5.6 IS

Offline leehookem

  • Trade Count: (3)
  • Needs to get out more...
  • *****
  • Posts: 4439
  • Gender: Male
    • Texas Tapers
Re: Marantz 671 in the field... Part 2
« Reply #134 on: March 22, 2006, 12:24:50 AM »
Alright...I gotta say after my first field run, I think this thing is pretty much idiot proof.  With the presets, margin reset and easy to use scroll wheel for gain, it's hard to fuck up.
www.texastapers.org


AKG c480b ck61/ck63 > Tascam DR-70D
Oade ACM Marantz PMD-671
AKG ck61/63 > NBob Actives > Naiant PFA > Tascam DR-70D
Oade ACM Marantz PMD-671
Audiophile 2496 > Mytek Stereo96 DAC > Sony MDR-7506
Dual 1229 > Marantz 2270 > Kimber Kables > Cerwin Vega VS120

Canon Rebel XSi, EF 50 mm f/1.8, EF-S 18-55mm f/3.5-5.6 IS

 

RSS | Mobile
Page created in 0.077 seconds with 39 queries.
© 2002-2024 Taperssection.com
Powered by SMF